Music & Audio Advice Acoustic Treatment Principles Questions and Answers

Question 1

A recording studio owner is experiencing a metallic, ringing sound, particularly noticeable with sharp, transient sounds like hand claps. This issue is most prominent in a vocal booth with hard, parallel walls. What is the most likely acoustic problem?

Accepted Answer

Flutter Echo

Answer

Flutter echo is a rapid series of echoes that occurs when sound bounces back and forth between two parallel, reflective surfaces. This creates the characteristic metallic ringing or fluttering sound described, which is especially obvious with percussive sounds in rooms with untreated parallel walls.

Question 2

To effectively absorb low-frequency energy and control room modes in a small control room, where is the most strategic placement for porous absorption bass traps?

Accepted Answer

In the tri-corners, where two walls and the ceiling/floor meet.

Answer

Low-frequency sound energy builds up most significantly in the corners of a room, especially the tri-corners (where three surfaces meet). Placing bass traps in these high-pressure zones allows for the most efficient absorption of problematic low-frequency standing waves.

Question 3

Which of the following acoustic treatments is designed to scatter sound energy in many directions rather than absorb it, helping to create a more spacious and natural-sounding room without making it sound 'dead'?

Accepted Answer

Diffusers

Answer

Diffusers use uneven surfaces of varying depths to scatter sound reflections in multiple directions. Unlike absorbers which remove acoustic energy, diffusers redistribute it, which can prevent issues like flutter echo while preserving the natural ambiance of the space.

Question 4

An acoustician measures the time it takes for the sound pressure level in a live room to decrease by 60 decibels after a loud, impulsive sound is made. What is this measurement officially known as?

Accepted Answer

Reverberation Time (RT60)

Answer

RT60, or Reverberation Time, is the standard metric used to measure how long it takes for sound to decay by 60 dB in a given space after the source has stopped. It's a critical parameter for assessing a room's overall acoustic character.

Question 5

A mix engineer wants to improve stereo imaging and reduce comb filtering at the listening position. Treating which of the following areas will provide the most significant and immediate improvement?

Accepted Answer

The first reflection points on the side walls and ceiling.

Answer

First reflection points are the surfaces where sound from the monitors reflects once before reaching the listener's ears. These reflections arrive slightly delayed from the direct sound, causing phase cancellations (comb filtering) and smearing the stereo image. Treating these points on the side walls and ceiling with absorption is a primary step for creating an accurate monitoring environment.

Music & Audio Advice Practice Test

Music & Audio Advice Practice Test

Music & Audio Advice Acoustic Treatment Principles Questions and Answers