Practice Test GeeksMTO - Ministry of Transportation Practice Test
← All MTO Flashcard Decks

Freight & Goods Movement Flashcards

7 cards from real MTO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Freight & Goods Movement flashcards as text

  1. What is the maximum allowable gross vehicle weight (GVW) on Ontario highways without a special permit?

    Answer: 63,500 kg

    Ontario's Highway Traffic Act sets the maximum GVW at 63,500 kg for vehicles operating on provincial highways without a special permit.

  2. Which legislation governs the safe transportation of dangerous goods in Canada?

    Answer: Transportation of Dangerous Goods Act

    The Transportation of Dangerous Goods Act (TDGA) is the primary federal law regulating the handling, offering for transport, and transporting of dangerous goods in Canada.

  3. What document must legally accompany a shipment of dangerous goods during transport in Canada?

    Answer: Shipping document

    Under the TDG Act, a shipping document containing specific information about the dangerous goods must accompany every shipment during transport.

  4. Under National Safety Code Standard 10, what is the minimum number of tie-downs required for cargo between 1.52 m and 3.04 m in length?

    Answer: 2

    NSC Standard 10 requires at least 2 tie-downs for cargo between 1.52 m and 3.04 m in length to prevent shifting during transit.

  5. What type of MTO permit is required to move loads that exceed standard legal dimensions or weight limits in Ontario?

    Answer: Special Vehicle Configuration permit

    An MTO Special Vehicle Configuration (SVC) permit is required for moving oversize or overweight loads that exceed Ontario's standard legal limits.

  6. What is a bill of lading primarily used for in freight transportation?

    Answer: Documenting the contract of carriage between shipper and carrier

    A bill of lading serves as a contract of carriage between the shipper and carrier, documenting the goods being transported and terms of delivery.

  7. What is the primary purpose of National Safety Code (NSC) Standard 10?

    Answer: Regulating load securement to prevent cargo from shifting during transit

    NSC Standard 10 establishes minimum standards for load securement to prevent cargo from falling, shifting, or becoming dislodged during transport.