ME or MEng Master of Engineering Master of Civil Engineering 3

Question 1

The critical path in a CPM schedule is defined as:

Accepted Answer

The sequence of activities with the longest total duration

Answer

The critical path is the longest sequence of dependent activities, determining the minimum project duration with zero total float.

Question 2

In open channel flow, the Froude number equals 1.0 at:

Accepted Answer

Critical flow conditions

Answer

Fr = 1 defines critical flow, where specific energy is minimized for a given discharge and flow transitions between subcritical and supercritical states.

Question 3

Which test is most commonly used to determine the unconfined compressive strength (qu) of cohesive soils?

Accepted Answer

Unconfined Compression Test (UCT)

Answer

The Unconfined Compression Test applies axial load to a cohesive soil cylinder with no confining pressure to directly measure qu.

Question 4

The design wind pressure on a building cladding component per ASCE 7 depends on:

Accepted Answer

Wind speed, exposure category, topographic factors, and component area

Answer

ASCE 7 wind pressure calculations incorporate basic wind speed, exposure category, height, topographic effects, and component tributary area for C&C design.

Question 5

A culvert operating under outlet control has its hydraulic performance governed primarily by:

Accepted Answer

Downstream tailwater, barrel friction, and outlet losses

Answer

Under outlet control, flow through the entire barrel is full-pipe flow governed by headwater, tailwater, barrel length, roughness, and exit losses.

ME or MEng Master of Engineering Practice Test

ME or MEng Master of Engineering Practice Test

ME or MEng Master of Engineering Master of Civil Engineering 3