M1 - Motorcycle Motorcycle Handling and Control Questions and Answers 1

Question 1

When executing a turn at speeds above 10-15 mph, what is the proper technique to initiate the lean?

Accepted Answer

Push forward on the handgrip in the direction you want the motorcycle to go.

Answer

To turn a motorcycle at speed, you must use a technique called counter-steering. This involves pushing forward on the handgrip in the direction of the intended turn (push right to go right, push left to go left). This action causes the motorcycle to lean, which is necessary for cornering.

Question 2

You are approaching a corner and need to slow down. What is the recommended braking practice?

Accepted Answer

Slow down before the turn by applying both brakes smoothly.

Answer

The safest and most effective practice is to reduce your speed *before* entering the turn. This should be done by smoothly applying both the front and rear brakes. Braking while in the turn can upset the motorcycle's suspension and traction, increasing the risk of a skid.

Question 3

Which of the following is the BEST lane position for enhancing your visibility to other drivers and maintaining a space cushion?

Accepted Answer

A position that varies depending on the current traffic and road conditions.

Answer

There is no single 'best' lane position; it is situational. A rider must constantly assess traffic, road hazards, and visibility to select the optimal position. This may mean being in the left, center, or right third of the lane to see, be seen, and have an escape path.

Question 4

While riding in a group, the leader extends their left arm straight out and then bends it down at a 90-degree angle with their palm facing backward. What does this signal mean?

Accepted Answer

Stop.

Answer

This is the standard hand signal for 'Stop'. The leader is indicating that the entire group needs to come to a stop. It's crucial for all riders in the group to know these signals to maintain safety and organization.

Question 5

If your rear wheel locks up and begins to skid while braking in a straight line, what is the correct response?

Accepted Answer

Keep the rear brake applied and focus on keeping the motorcycle upright and straight.

Answer

If the rear wheel locks, you should not release the brake suddenly, as this can cause a dangerous 'high-side' crash. The proper technique is to keep the brake applied, which keeps the wheel from regaining traction abruptly, and use the handlebars to keep the motorcycle traveling in a straight line until you stop.

M1 Motorcycle Practice Test

M1 Motorcycle Practice Test

M1 - Motorcycle Motorcycle Handling and Control Questions and Answers 1