Lineman Safety Regulations and Compliance 2

Question 1

Under OSHA 1910.269, what is the minimum approach distance (MAD) concept designed to protect against?

Accepted Answer

Electrical shock and arc flash from energized conductors

Answer

MAD establishes the closest a qualified worker may approach energized conductors to avoid shock and arc-flash hazards.

Question 2

A lineman is working on a distribution circuit and must verify the line is de-energized. Which step comes FIRST in the lockout/tagout sequence?

Accepted Answer

Identify all energy sources

Answer

OSHA requires that all energy sources be identified before any isolation or lockout steps are performed.

Question 3

Which document establishes the National Electrical Safety Code (NESC) that governs utility line work in the United States?

Accepted Answer

ANSI C2

Answer

ANSI C2 is the designation for the National Electrical Safety Code, the primary standard for utility construction and operation.

Question 4

When a lineman must work within the Limit of Approach for energized conductors, what personal protective equipment is required at a minimum?

Accepted Answer

Rubber insulating gloves and sleeves rated for the voltage

Answer

Rubber insulating gloves with leather protectors and sleeves rated for the line voltage are the minimum PPE when contacting or approaching energized parts.

Question 5

What does the term 'assured equipment grounding conductor program' (AEGCP) require on a job site?

Accepted Answer

Regular inspection and testing of all cord-connected equipment and extension cords

Answer

An AEGCP requires documented inspection and electrical testing of equipment and cords at prescribed intervals to ensure continuity of grounding conductors.

(Lineman) Lineman Certification Practice Test

(Lineman) Lineman Certification Practice Test

Lineman Safety Regulations and Compliance 2