Lean Six Sigma Black Belt Control Phase: SPC Questions and Answers Flashcards
6 cards from real Lean Six Sigma Black Belt Certification practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Lean Six Sigma Black Belt Control Phase: SPC Questions and Answers flashcards as text
A process has an X-bar chart with UCL = 50.5, CL = 50.0, and LCL = 49.5. If a single point plots at 50.7, what is the correct interpretation?
Answer: The process has a special cause variation
Any point plotting beyond a control limit signals a special cause of variation requiring investigation.
Which Western Electric rule is violated when two out of three consecutive points fall in Zone A on the same side of the center line?
Answer: Rule 2 — two of three in Zone A
Western Electric Rule 2 triggers when two out of three consecutive points fall in Zone A (between 2σ and 3σ) on the same side.
When should a Black Belt choose an Individuals and Moving Range (I-MR) chart over an X-bar and R chart?
Answer: When only one measurement per time period is available
I-MR charts are used when subgrouping is not possible and only individual measurements are available per sampling period.
What is the primary purpose of calculating process capability index Cpk rather than Cp?
Answer: Cpk accounts for process centering relative to specification limits
Cpk accounts for both process spread and how well the process is centered between the specification limits.
On a p-chart monitoring the fraction defective, what distribution is used to calculate the control limits?
Answer: Binomial distribution
The p-chart is based on the binomial distribution since it tracks the proportion of nonconforming units in a sample.
A u-chart is preferred over a c-chart when which condition exists?
Answer: The sample size varies from subgroup to subgroup
A u-chart tracks defects per unit and accommodates varying sample sizes, while a c-chart requires constant sample sizes.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- iassc.org — Eligibility, fees, exam format, passing score, time limit, score validity, test delivery, retake policy · verified Oct 2026
- peoplecert.org — Test dates · verified Oct 2026