Building Inspection Flashcards

Which of the following best describes the primary role of a building inspector?

Answer: Verify that construction work complies with adopted codes and approved plans

Building inspectors verify that construction work complies with the adopted codes and the approved construction documents.

At what stage should a footing inspection typically be requested?

Answer: After forms and reinforcing are in place but before concrete is poured

Footing inspections must occur after forms and reinforcing are in place but before concrete is poured so the inspector can verify proper placement.

According to the IBC, who is responsible for requesting required inspections?

Answer: The owner or the owner's authorized agent

Under the IBC, it is the responsibility of the owner or the owner's authorized agent to notify the building official that work is ready for inspection.

A stop work order may be issued when:

Answer: Work is being done contrary to the provisions of the code or the issued permit

A stop work order is issued when work is proceeding contrary to the adopted code or the approved permit conditions.

Which inspection verifies that all required inspections have been completed and that the structure is suitable for occupancy?

Answer: Final inspection

A final inspection is conducted to verify all required work is complete and the structure meets code requirements before a certificate of occupancy is issued.

Under the IBC, 'substantial improvement' to a structure located in a flood hazard area means any improvement whose cost equals or exceeds what percentage of the structure's market value?

Answer: 50%

The IBC defines substantial improvement in a flood hazard area as reconstruction, rehabilitation, or improvement whose cost equals or exceeds 50% of the structure's pre-improvement market value.

Which of the following generally does NOT require a building permit under the IBC?

Answer: Ordinary repairs that do not affect structural members or fire-rated assemblies

The IBC exempts ordinary repairs from permit requirements when they do not affect structural members, fire-rated assemblies, means of egress, or building systems.