← All ICC Flashcard Decks

Building Code Professionals Flashcards

7 cards from real ICC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Building Code Professionals flashcards as text
  1. What is the maximum riser height permitted for a stairway in a Group R-3 occupancy under the IRC?

    Answer: 7.75 inches

    The IRC permits a maximum riser height of 7-3/4 inches (7.75 inches) for stairways in Group R-3 one- and two-family dwellings.

  2. When a jurisdiction adopts the IBC with local amendments, which document takes precedence in the event of a conflict between the local amendment and the base code?

    Answer: The local amendment takes precedence

    Locally adopted amendments supersede the base code provisions they modify, as municipalities have authority to set standards at least as restrictive as the model code.

  3. Which ICC certification is required for an individual who reviews and approves plans for electrical systems in commercial buildings?

    Answer: ICC Electrical Plans Examiner

    The ICC Electrical Plans Examiner certification qualifies an individual to review construction documents for electrical systems in commercial projects.

  4. What is the minimum required illumination level at the floor level for means of egress lighting under the IBC?

    Answer: 1 foot-candle

    The IBC requires a minimum of 1 foot-candle of illumination at the floor level along means of egress pathways.

  5. Under the IMC (International Mechanical Code), what is the minimum clearance required between a gas-fired furnace and combustible construction when the furnace is not listed for reduced clearances?

    Answer: As specified by the manufacturer's listing

    The IMC requires that equipment be installed with clearances as specified by the manufacturer's listing and labeling, which takes precedence for unlisted appliances.

  6. Which IBC chapter specifically addresses the structural design loads, including dead loads, live loads, snow loads, and wind loads?

    Answer: Chapter 16

    IBC Chapter 16 covers structural design, including all design load requirements such as dead, live, roof, snow, wind, and seismic loads.

  7. What action is required under the IBC when a contractor submits a request for alternate materials or methods of construction?

    Answer: The building official must evaluate and approve the alternate as providing equivalent performance

    The IBC's alternate materials provision requires the building official to evaluate whether the proposed alternate provides at least equivalent performance to the code-prescribed method.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. iccsafe.org — Renewal, score validity, test delivery, retake policy, time limit, retake fee · verified Oct 2026
  2. pearsonvue.com — Registration · verified Oct 2026