I-CAR - Inter-Industry Conference on Auto Collision Repair Certified Non-Structural Panel Repair Questions and Answers

Question 1

A technician is preparing a repaired area on a steel door skin for primer. After completing the body filler work and sanding it with 150-grit sandpaper, what is the next recommended step in the feather, prime, and block process according to industry standards?

Accepted Answer

Featheredge the surrounding area with 180-grit, followed by 220-grit and then 320-grit sandpaper.

Answer

The correct procedure after initial bodywork is to featheredge the repair area, gradually using finer grits of sandpaper to create a smooth transition from the filler to the original paint. This ensures the primer will adhere properly and prevents sanding scratches from showing in the final finish.

Question 2

When performing a two-sided repair on a crack that penetrates a plastic bumper cover, which of the following is a critical first step for the backside repair?

Accepted Answer

Apply a thin coat of repair material, embed reinforcing mesh, and then apply another coat of material over the mesh.

Answer

For a durable two-sided plastic repair, the backside must be reinforced. The standard procedure involves applying a layer of adhesive, embedding a reinforcing mesh or cloth into the wet material, and then encapsulating it with another layer. This creates a strong, stable foundation for the cosmetic repair on the front.

Question 3

Which of the following is a primary reason that repairing a large, sharp dent on an aluminum hood is significantly more challenging than a similar dent on a mild steel hood?

Accepted Answer

Aluminum work-hardens at the site of the damage and does not have the 'memory' of steel.

Answer

Aluminum undergoes work-hardening when it is bent or stretched, making the damaged area stronger and more resistant to being reshaped. Unlike steel, aluminum does not have 'metal memory,' meaning it will not naturally try to return to its original shape, making the repair process more difficult.

Question 4

A technician needs to restore corrosion protection to the inside of a new non-structural rocker panel after installation. According to I-CAR recommendations, what is the generally preferred method for treating this enclosed area?

Accepted Answer

Applying anti-corrosion compound alone using a 360-degree spray nozzle wand.

Answer

Modern I-CAR recommendations for enclosed areas like rocker panels, which are already E-coated from the factory, focus on applying an anti-corrosion compound alone. This is applied using a wand with a 360-degree nozzle to ensure complete coverage, creeping into seams and protecting weld areas.

Question 5

A vehicle comes into the shop with several small, shallow dents on the trunk lid where the paint is not broken. The owner wants the most efficient and cost-effective repair that preserves the factory finish. Which repair method is most suitable for this scenario?

Accepted Answer

Paintless Dent Repair (PDR).

Answer

Paintless Dent Repair (PDR) is the ideal method for small dents and dings where the paint surface is intact. PDR technicians use specialized tools to massage the metal back to its original form from the backside of the panel, preserving the factory paint and offering a faster, less expensive repair than traditional methods.

I-CAR - Inter-Industry Conference on Auto Collision Repair Certified Practice Test

I-CAR - Inter-Industry Conference on Auto Collision Repair Certified Practice Test

I-CAR - Inter-Industry Conference on Auto Collision Repair Certified Non-Structural Panel Repair Questions and Answers