Practice Test Geeks(HP) HP Certified Professional Practice Test
← All HP Flashcard Decks

IT Infrastructure & Networking Flashcards

7 cards from real HP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 IT Infrastructure & Networking flashcards as text

  1. Which HP storage technology uses Non-Volatile Memory Express (NVMe) over Fabrics to provide low-latency storage access across a network?

    Answer: HP Primera with NVMe-oF

    HP Primera supports NVMe-oF, extending NVMe's low-latency benefits across fiber channel or Ethernet fabrics to shared storage.

  2. An administrator needs to aggregate two 10GbE links between an HP server and an HP switch for bandwidth and redundancy. Which protocol should be configured?

    Answer: Link Aggregation Control Protocol (LACP)

    LACP (IEEE 802.3ad) dynamically negotiates link aggregation between devices, combining multiple physical links into a single logical channel.

  3. What is the maximum number of nodes supported in an HP Moonshot chassis?

    Answer: 45

    The HP Moonshot 1500 chassis supports up to 45 server cartridges in a 4.3U form factor for dense, low-power workloads.

  4. In HP OneView, what is a 'Server Profile Template' used for?

    Answer: Creating reusable configuration baselines that can be applied to multiple servers

    Server Profile Templates in HP OneView define a standard configuration that can be applied consistently across multiple servers for rapid deployment.

  5. Which spanning tree mode on HP Aruba switches provides the fastest convergence time after a topology change?

    Answer: RSTP (802.1w)

    RSTP (Rapid Spanning Tree Protocol) converges significantly faster than legacy STP by using proposal/agreement handshakes instead of timers.

  6. HP Nimble Storage uses which predictive analytics technology to forecast and prevent storage issues before they impact performance?

    Answer: InfoSight

    HP Nimble InfoSight uses machine learning to analyze telemetry from millions of storage sensors to predict and prevent performance issues proactively.

  7. When configuring Quality of Service (QoS) on an HP Aruba switch, which marking method operates at Layer 3 of the OSI model?

    Answer: DSCP (Differentiated Services Code Point)

    DSCP marks traffic priority in the IP header's ToS field at Layer 3, while 802.1p CoS operates at Layer 2 using VLAN tag bits.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. certification-learning.hpe.com — Exam format, retake policy, score release, renewal, score validity · verified Oct 2026
  2. pearsonvue.com — Test delivery, fees, retake fee, retake policy · verified Oct 2026