GMetrix Exam GMetrix Revit: Basic Element Modeling 4

Question 1

In Revit, what does the 'Attach Top/Base' command do to a wall?

Accepted Answer

Connects the wall's top or base to an adjacent floor or roof element so it follows that element's geometry

Answer

Attach Top/Base links a wall's top or bottom to a roof, floor, or ceiling, so the wall adjusts automatically as that element changes.

Question 2

Which Revit command would you use to create a railing along a staircase?

Accepted Answer

Architecture > Railing > Sketch Path

Answer

The Railing tool under the Architecture tab lets you sketch a path along a stair or ramp to place a railing.

Question 3

What is the function of a 'Reference Plane' in Revit?

Accepted Answer

It provides a non-printing construction aid for snapping and aligning elements

Answer

Reference planes are non-printing work planes used to guide element placement, alignment, and parametric control in families and projects.

Question 4

When editing a floor boundary in Revit, which sketch tool restriction must be met for the floor to be created?

Accepted Answer

The boundary lines must form a closed, non-intersecting loop

Answer

Floor sketches require a fully closed loop with no gaps or overlapping lines; otherwise Revit will not allow the floor to be created.

Question 5

Which view would you activate to see a building model looking straight down from above?

Accepted Answer

Floor Plan view

Answer

Floor Plan views display the building from a top-down perspective at a defined cut height, typically 4 feet above the floor level.

GMetrix Exam Practice Test