GMetrix Exam GMetrix Inventor: 3D Part Creation 4

Question 1

In Inventor, which sketch tool draws a straight line segment that automatically becomes construction geometry?

Accepted Answer

Construction Line (toggled via the Construction button)

Answer

Enabling the Construction toggle before or after drawing a line marks it as construction geometry, which guides but does not define the profile boundary.

Question 2

Which Inventor termination type extrudes a feature exactly to the surface of an existing face, even if that face is curved?

Accepted Answer

To Surface

Answer

The 'To Surface' termination ends the extrusion precisely at a selected face, conforming to any contour that face has.

Question 3

What is the primary difference between a 'Fillet' and a 'Chamfer' edge treatment in Inventor?

Accepted Answer

Fillet creates a rounded edge; Chamfer creates an angled flat edge

Answer

A Fillet blends two faces with a curved radius, while a Chamfer cuts a straight angled surface between them.

Question 4

In Inventor, the 'Project Geometry' tool in a sketch is used to:

Accepted Answer

Copy edges or points from existing 3D geometry onto the active sketch plane

Answer

Project Geometry traces selected edges, vertices, or curves from 3D model faces onto the current sketch, creating reference lines for new sketch geometry.

Question 5

Which Inventor browser environment contains parameters that control overall part dimensions and can be referenced by multiple features?

Accepted Answer

Parameters (fx: Parameters dialog)

Answer

The Parameters dialog (opened via Manage > Parameters) stores named dimensional values that features and sketches can reference, enabling parametric design.

GMetrix Exam Practice Test

GMetrix Exam Practice Test

GMetrix Exam GMetrix Inventor: 3D Part Creation 4