GMetrix Exam GMetrix Inventor: 3D Part Creation 2

Question 1

Which Inventor feature allows you to remove material by projecting a 2D sketch profile along a path through a 3D solid?

Accepted Answer

Sweep Cut

Answer

A Sweep Cut removes material by sweeping a profile sketch along a separate path curve.

Question 2

In Autodesk Inventor, what does a yellow highlight on a sketch constraint icon typically indicate?

Accepted Answer

The constraint is redundant or over-constraining the sketch

Answer

Yellow highlighting on a constraint icon warns that the constraint is redundant and conflicts with other existing constraints.

Question 3

When creating a Loft feature between two profiles in Inventor, what additional geometry can you add to control the shape of the transition?

Accepted Answer

Rails

Answer

Rails are guide curves added to a Loft to control how the transition blends between the two profiles.

Question 4

Which tool in Inventor is used to create a flat pattern from a sheet metal part?

Accepted Answer

Flat Pattern

Answer

The Flat Pattern tool unfolds all bends in a sheet metal part to produce a flat layout for manufacturing.

Question 5

What is the purpose of the 'Fix' constraint in an Inventor sketch?

Accepted Answer

Locks a point or curve to its current position in space

Answer

The Fix constraint anchors a sketch element to an absolute position, preventing it from moving during solving.

GMetrix Exam Practice Test