Safety and OSHA Regulations Flashcards
21 cards from real General Contractor License practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 20 Safety and OSHA Regulations flashcards as text
Under OSHA's fall protection standard for construction (29 CFR 1926.502), what is the maximum free-fall distance allowed when using a personal fall arrest system?
Answer: 6 feet
OSHA limits free-fall distance to 6 feet when using a personal fall arrest system in construction.
A construction site has a trench that is 6 feet deep and 4 feet wide. Which of the following is NOT an acceptable OSHA-compliant protective system?
Answer: Placing spoil material 1 foot from the edge
OSHA requires spoil material to be placed at least 2 feet from the edge of a trench, not 1 foot.
Which OSHA standard covers hazard communication (HazCom) and requires Safety Data Sheets (SDS) on construction sites?
Answer: 29 CFR 1910.1200
The Hazard Communication Standard is 29 CFR 1910.1200, which applies to construction sites via 1926.59.
When must a competent person inspect an excavation?
Answer: Before each shift and after any hazard-increasing event
OSHA requires a competent person to inspect excavations before each shift and after any event that could increase hazards, such as rainfall or equipment loading.
Under OSHA's scaffold standard, what is the minimum width of a scaffold platform that is more than 14 inches from the face of the work?
Answer: 20 inches
OSHA requires scaffold platforms to be at least 18 inches wide when within 14 inches of the face, or 20 inches if farther away.
A general contractor receives an OSHA Citation with a 15-day contest period. What happens if the contractor misses the deadline to contest?
Answer: The citation becomes a final order of the OSHA Review Commission
If an employer fails to contest an OSHA citation within 15 working days, it becomes a final order of the Occupational Safety and Health Review Commission and cannot be appealed.
Which type of OSHA violation carries the highest potential penalty and is defined as a violation that could cause death or serious physical harm that the employer knew about?
Answer: Willful violation
A willful violation, where the employer intentionally disregards OSHA requirements or acts with plain indifference, carries the highest penalties of up to $156,259 per violation.
Under OSHA's electrical safety standards, what is the minimum safe approach distance for unqualified workers near overhead power lines energized at 50 kV or less?
Answer: 10 feet
OSHA requires unqualified workers to maintain a minimum distance of 10 feet from overhead power lines energized at 50 kV or less.
A worker suffers an amputation on a construction site. How quickly must the general contractor report this incident to OSHA?
Answer: Within 24 hours
OSHA requires that any work-related amputation, inpatient hospitalization, or loss of an eye be reported within 24 hours.
What is the purpose of a 'toolbox talk' (also called a safety meeting or tailgate meeting) on a construction site?
Answer: To provide brief, focused safety training on specific hazards before work begins
Toolbox talks are short, informal training sessions conducted before work to address specific hazards workers will encounter that day.
Under OSHA's noise standard, at what sound level (dBA) does a contractor first become required to implement a hearing conservation program?
Answer: 85 dBA as an 8-hour TWA
OSHA's hearing conservation program requirements are triggered when noise exposure reaches or exceeds 85 dBA as an 8-hour time-weighted average.
Which ladder type is rated for industrial use, has the highest load rating, and is required when a worker's weight plus tools exceeds 250 pounds?
Answer: Type IA (Extra Heavy Duty, 300 lbs)
Type IA ladders are rated for 300 pounds and are required when combined worker and tool weight exceeds 250 pounds.
What does OSHA's 'multi-employer worksite' policy mean for a general contractor who does not directly create a hazard?
Answer: The GC may be cited if it had control over the hazardous condition
Under OSHA's multi-employer policy, a general contractor can be cited as a 'controlling employer' if it had authority to correct a hazard, even if a subcontractor created it.
When is a safety harness inspection required before use on a construction site?
Answer: Before each use by the worker and annually by a competent person
OSHA requires workers to inspect their personal fall arrest equipment before each use, and a competent person must conduct formal inspections at least annually.
A general contractor is working in a confined space that contains a toxic atmosphere. Which permit-required confined space entry element is being addressed by testing the air before entry?
Answer: Atmospheric testing and monitoring
Atmospheric testing and monitoring is a core permit-required confined space requirement that must be completed before and during entry to detect hazardous conditions.
Under OSHA's lockout/tagout (LOTO) standard, what must occur before maintenance work begins on equipment with stored energy?
Answer: All energy sources must be isolated and verified as zero-energy state
LOTO requires all energy sources to be isolated, locked, and verified to be in a zero-energy (de-energized) state before maintenance begins.
OSHA's 300 Log must be kept on file for how long?
Answer: 5 years
Employers must retain OSHA 300 Logs, 301 Incident Reports, and 300A Summary forms for 5 years following the end of the calendar year they cover.
Which of the following construction activities requires workers to have documented respirator training and a medical evaluation before use under OSHA 29 CFR 1910.134?
Answer: Using a half-face air-purifying respirator for silica exposure control
When respirators are required for hazard control (such as silica), OSHA mandates medical evaluation, fit testing, and training before use.
A subcontractor's employee tells the general contractor's supervisor that their employer has not provided required fall protection. What should the GC supervisor do?
Answer: Correct the hazard or stop work in that area as the controlling employer
As the controlling employer, the GC has authority and responsibility to correct hazards or stop work when required safety measures are absent, regardless of which employer's workers are exposed.
Under OSHA's struck-by hazard standards, what color must a hard hat be for a site safety officer to be easily identified on a construction site by convention?
Answer: Green
While not mandated by OSHA, industry convention designates green hard hats for safety officers and inspectors to make them easily identifiable on site.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- cslb.ca.gov — Fees, renewal · verified Oct 2026
- web.cslb.ca.gov — Test delivery, exam format, retake policy, score release, score validity · verified Oct 2026
- test-takers.psiexams.com — Exam format, passing score, retake policy, score release, time limit, score validity · verified Oct 2026
- psiexams.com — Eligibility · verified Oct 2026
- www2.myfloridalicense.com — Registration deadline, exam format, passing score, test delivery · verified Oct 2026