Mixed Deck — All General Contractor License Topics Flashcards
100 cards from real General Contractor License practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 20 Mixed Deck — All General Contractor License Topics flashcards as text
An owner wants to use a design-build contract instead of a traditional design-bid-build approach. What is the main legal difference for the contractor?
Answer: The contractor assumes responsibility for both design and construction
In design-build, the single entity (contractor or design-builder) is responsible for both the design and construction, consolidating liability and eliminating the traditional separation between designer and builder.
A contractor who fails to carry required workers' compensation insurance may face which consequence?
Answer: License suspension, fines, and personal liability for worker injuries
Operating without required workers' compensation exposes contractors to license revocation, significant fines, and direct liability for injured workers' costs.
A competent person inspects an excavation and classifies the soil as Type C. According to OSHA standards for excavations 20 feet or less in depth, what is the maximum allowable simple slope?
Answer: 1 ½ horizontal to 1 vertical (1½:1)
OSHA's Subpart P specifies the maximum allowable slopes for excavations less than 20 feet deep. For Type C soil, which is the least stable classification (includes granular soils, submerged soil, or soil with freely seeping water), the required slope is 1½ horizontal to 1 vertical (1½:1), which corresponds to a 34-degree angle.
Regarding trusses, Which of the following statements is untrue?
Answer: Trusses are never used as repetitive lightweight members, such as steel bar
The statement that trusses are never used as repetitive lightweight members, such as steel bar, is untrue. Trusses, particularly steel bar joists, are very commonly used as repetitive lightweight structural members for roofs and floors in various types of buildings. Their triangulated geometry allows them to efficiently span long distances while minimizing material use and weight, making them an economical and effective choice for such applications.
What legal concept allows a contractor to recover the reasonable value of work performed when no valid contract exists but the owner has been unjustly enriched?
Answer: Quantum meruit
Quantum meruit (Latin for 'as much as deserved') allows recovery of the reasonable value of services rendered when there is no enforceable contract, to prevent unjust enrichment.
Under OSHA's electrical safety standards, what is the minimum safe approach distance for unqualified workers near overhead power lines energized at 50 kV or less?
Answer: 10 feet
OSHA requires unqualified workers to maintain a minimum distance of 10 feet from overhead power lines energized at 50 kV or less.
What does OSHA's 'multi-employer worksite' policy mean for a general contractor who does not directly create a hazard?
Answer: The GC may be cited if it had control over the hazardous condition
Under OSHA's multi-employer policy, a general contractor can be cited as a 'controlling employer' if it had authority to correct a hazard, even if a subcontractor created it.
During project closeout, which of the following should the general contractor compile and deliver to the owner?
Answer: As-built drawings, warranties, operations and maintenance (O&M) manuals, and final lien waivers
Complete project closeout documents include as-builts, manufacturer warranties, O&M manuals, training records, and final lien releases to transfer full building responsibility to the owner.
A contractor's license is automatically suspended in most states when which of the following occurs?
Answer: The contractor's required surety bond or insurance lapses
Most state licensing boards automatically suspend a contractor's license when required bonds or insurance lapse, because these protections are conditions of licensure.
What kind of screws are utilized for light-gauge steel and gypsum installation?
Answer: Type S screws
Type S screws are specifically engineered for fastening gypsum board to light-gauge steel studs or channels. They feature a sharp point for easy penetration and fine threads that provide a secure grip in thin metal, preventing stripping and ensuring a strong attachment. Their design is optimized for the specific requirements of drywall and light-gauge steel framing applications.
A project owner requests a change that adds $45,000 in scope. Before proceeding, the general contractor should:
Answer: Submit a written change order proposal and wait for written approval
All scope additions must be documented through a formal change order signed by both parties before work begins to protect payment rights.
Which of the following is the primary responsibility of the project supervisor regarding on-site safety?
Answer: Ensuring all on-site personnel comply with established safety regulations and procedures.
The primary role of a project supervisor is to ensure the day-to-day implementation and enforcement of the project's safety plan. This includes making sure all workers, including subcontractors, adhere to safety regulations, use PPE correctly, and follow safe work practices. While they are involved in safety, their main function is enforcement and daily oversight, not solely procurement or initial plan development.
A worker is tasked with servicing a permanently installed air conditioning unit. To comply with Lockout/Tagout (LOTO) standards, what is the critical first step in the process?
Answer: Notify all affected employees that the equipment will be shut down for service.
The first step in the LOTO procedure is preparation, which includes identifying all energy sources and notifying all affected employees of the impending shutdown. This ensures that no one attempts to operate the equipment while it is being serviced. Applying the lock, verifying isolation, and performing the work all come after notification and shutdown.
A worker suffers an amputation on a construction site. How quickly must the general contractor report this incident to OSHA?
Answer: Within 24 hours
OSHA requires that any work-related amputation, inpatient hospitalization, or loss of an eye be reported within 24 hours.
When a contractor works directly with the owner of residential property and the contract fee is: a written agreement between the parties is necessary.
Answer: $2,000 or more
In many states, including California, a written contract is legally required for home improvement projects when the contract price exceeds a certain threshold to protect both the homeowner and the contractor. While California's threshold is $500, $2,000 or more is a common and significant threshold in many jurisdictions for requiring a formal written agreement for residential property work.
Which OSHA standard covers hazard communication (HazCom) and requires Safety Data Sheets (SDS) on construction sites?
Answer: 29 CFR 1910.1200
The Hazard Communication Standard is 29 CFR 1910.1200, which applies to construction sites via 1926.59.
A general contractor notices a design error in the architectural drawings during construction. The BEST course of action is to:
Answer: Stop all related work and immediately notify the architect and owner in writing
The contractor must promptly notify the designer and owner in writing to allow for a directed correction, which also protects the contractor from liability for the design defect.
Which plumbing fitting is required at the base of a soil stack where it transitions from vertical to horizontal?
Answer: Long-sweep 1/4 bend
A long-sweep 1/4 bend (long-turn 90) is required at the base of a soil stack to allow waste flow to transition smoothly from vertical to horizontal without clogging.
Under most state contractor licensing laws, advertising as a contractor without a license is:
Answer: A violation subject to fines even if no work is performed
Most states prohibit advertising contracting services without a license, and violations can result in fines regardless of whether any work is actually contracted or performed.
Which of the following joint types can be used to bring different pipe materials together?
Answer: Mechanical
Mechanical joints, such as compression fittings, flanged connections, or couplings, utilize gaskets, bolts, or other clamping mechanisms to create a seal and secure connection between pipes. Unlike brazed, welded, or soldered joints which require heat and material fusion, mechanical joints do not rely on the pipes being made of similar or compatible materials for fusion. This allows them to effectively join different pipe materials, like connecting a PVC pipe to a copper pipe.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- cslb.ca.gov — Fees, renewal · verified Oct 2026
- web.cslb.ca.gov — Test delivery, exam format, retake policy, score release, score validity · verified Oct 2026
- test-takers.psiexams.com — Exam format, passing score, retake policy, score release, time limit, score validity · verified Oct 2026
- psiexams.com — Eligibility · verified Oct 2026
- www2.myfloridalicense.com — Registration deadline, exam format, passing score, test delivery · verified Oct 2026