Site Work and Excavation Flashcards
6 cards from real General Contractor License practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Site Work and Excavation flashcards as text
An excavation is planned to be 10 feet deep in Type C soil. According to OSHA standards, what is the maximum allowable simple slope for the sides of this excavation?
Answer: 1½ Horizontal to 1 Vertical (1½H:1V)
According to OSHA 29 CFR 1926 Subpart P, for excavations in Type C soil, the maximum allowable simple slope is 1½ horizontal to 1 vertical (34 degrees). Type C is the least stable soil classification, requiring the flattest slope for protection against cave-ins. Benching is not a permissible protective system in Type C soil.
What is the standard laboratory test used by geotechnical engineers to determine the optimal moisture content at which a specific soil type will achieve its greatest density when compacted?
Answer: Proctor Compaction Test
The Proctor Compaction Test (either Standard or Modified) is the established laboratory method for determining the optimal moisture content and maximum dry density of a soil. This data is crucial for ensuring that fill material is properly compacted on site to provide adequate support for foundations, slabs, and pavement.
A contractor is preparing to start a new project. To ensure all elevations for foundations, floors, and utilities are accurate, the surveyor establishes a single, stable point of known elevation on the site. What is this reference point called?
Answer: Benchmark
A benchmark is a point of known elevation from which all other vertical measurements on a construction site are referenced. While control points establish horizontal (X,Y) position, a benchmark specifically serves as the datum for vertical (Z) dimensions, ensuring consistent heights throughout the project.
A general contractor is beginning site work for a new commercial building in a developed area. What is the legally mandated first step that must be taken to identify and prevent damage to existing underground public utilities?
Answer: Contact the national "Call Before You Dig" service by dialing 811.
State and federal law requires anyone who plans to excavate to contact their state's one-call utility location service, which is universally accessible by dialing 811. This service notifies member utility companies, who then send locators to mark the approximate location of their underground lines, preventing costly and dangerous utility strikes.
According to OSHA regulations for excavation safety (29 CFR 1926 Subpart P), what is the minimum distance that excavated materials, known as spoil, must be placed from the edge of a trench or excavation?
Answer: 2 feet
OSHA standard 1926.651(j)(2) requires that spoil piles and any other materials or equipment be kept at least 2 feet back from the edge of an excavation. This prevents the material from falling or rolling back into the excavation onto workers and reduces the surcharge load on the trench walls, which could contribute to a collapse.
Which of the following describes a broad, shallow, and typically vegetated channel designed to manage stormwater runoff by conveying it at a non-erosive velocity and promoting infiltration?
Answer: Swale
A swale, often grass-lined, is a drainage channel designed to slow the flow of stormwater, guide it to a desired location, and allow for filtration and infiltration into the ground. Unlike a French drain (subsurface), a catch basin (an inlet structure), or a culvert (a pipe under a roadway), a swale is an open, surface-level feature.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- cslb.ca.gov — Fees, renewal · verified Oct 2026
- web.cslb.ca.gov — Test delivery, exam format, retake policy, score release, score validity · verified Oct 2026
- test-takers.psiexams.com — Exam format, passing score, retake policy, score release, time limit, score validity · verified Oct 2026
- psiexams.com — Eligibility · verified Oct 2026
- www2.myfloridalicense.com — Registration deadline, exam format, passing score, test delivery · verified Oct 2026