GCC Building Codes, Permits, and Regulations 3

Question 1

Under IBC construction type classifications, which type offers the highest fire resistance?

Accepted Answer

Type I-A (non-combustible, highest fire-resistance ratings)

Answer

Type I-A requires structural elements with the highest fire-resistance ratings (up to 3 hours for columns/beams) and all non-combustible materials.

Question 2

A project in a flood zone requires compliance with which federal program's minimum standards?

Accepted Answer

NFIP (National Flood Insurance Program)

Answer

FEMA's NFIP sets minimum floodplain management standards that participating communities must adopt, affecting building elevations and flood-proofing requirements.

Question 3

What is the purpose of a 'rough-in inspection' during construction?

Accepted Answer

To verify that framing, plumbing, electrical, and mechanical work is correct before it is concealed

Answer

Rough-in inspections occur after work is installed but before walls are closed up, allowing the inspector to verify hidden systems meet code.

Question 4

An existing building undergoing renovation must meet current code for which elements, under most state amendments?

Accepted Answer

Accessibility (ADA), fire protection, and the specific elements being altered

Answer

Most jurisdictions apply current code to altered elements and trigger accessibility and fire upgrades upon renovation, while leaving untouched existing conditions under grandfather provisions.

Question 5

A contractor receives 'approved as noted' on submitted plans. What action is required?

Accepted Answer

Revise the plans to incorporate the noted corrections before construction proceeds

Answer

'Approved as noted' means the plans are conditionally approved pending incorporation of the reviewer's specific corrections.

(GCC) General Contracting Certification Practice Test

(GCC) General Contracting Certification Practice Test

GCC Building Codes, Permits, and Regulations 3