Gas Safe ACS - Accredited Certification Scheme Appliance Safety Devices Questions and Answers

Question 1

An engineer is servicing a flueless gas cabinet heater. What is the primary function of the Oxygen Depletion Sensor (ODS) fitted to this appliance?

Accepted Answer

To shut off the gas supply if the oxygen level in the room falls below a pre-set safe limit.

Answer

An Oxygen Depletion Sensor (ODS), also known as a Vitiation Sensing Device (VSD), monitors the oxygen level in the room. If the oxygen level drops to an unsafe point (typically around 18-18.5%), which indicates poor ventilation and the potential for incomplete combustion and CO production, the ODS will cause the gas valve to shut off, making the appliance safe.

Question 2

What is the principal role of a Flame Supervision Device (FSD) on a gas hob burner?

Accepted Answer

To automatically stop the flow of gas to the burner if the flame goes out.

Answer

A Flame Supervision Device (FSD), or Flame Failure Device (FFD), is a safety feature that stops the flow of unburned gas if the flame is accidentally extinguished. It typically uses a thermocouple that, when heated by the flame, generates a small electrical current to hold the gas valve open. If the flame goes out, the thermocouple cools, the current stops, and the valve closes.

Question 3

An engineer is testing an open-flued gas fire and suspects spillage of combustion products. Which safety device is designed to shut down the appliance if it detects a prolonged or serious blockage in the flue?

Accepted Answer

A flue spillage/blocked flue sensor.

Answer

A flue spillage/blocked flue sensor, often a form of thermal cut-out or atmospheric sensing device (ASD), is positioned near the draught diverter. If products of combustion spill back into the room due to a blocked or poorly performing flue, the sensor will overheat and trip, shutting off the gas supply to the main burner to prevent a dangerous build-up of fumes like carbon monoxide.

Question 4

While investigating a boiler lockout, an engineer observes water dripping from the discharge pipe of the Pressure Relief Valve (PRV). What is the most likely underlying cause for this?

Accepted Answer

The pressure within the sealed heating system has exceeded its safe operating limit.

Answer

A Pressure Relief Valve (PRV) is a safety device designed to release excess pressure from a sealed system (like a combination or system boiler) to prevent damage or rupture. If it is discharging water, it indicates the pressure inside the system has risen above the valve's set point (typically 3 bar), often due to a faulty expansion vessel or a problem with the filling loop.

Question 5

A thermocouple is a common component in a standing pilot assembly. How does it function to ensure safety?

Accepted Answer

It uses two dissimilar metals which, when heated by the pilot flame, generate a small voltage to hold the gas valve open.

Answer

A thermocouple works on the thermoelectric (Seebeck) effect. It is made of two different metals joined at one end. When this junction is heated by the pilot flame, it produces a millivolt electrical signal. This small current is strong enough to energise an electromagnet in the gas valve, holding it open. If the pilot flame extinguishes, the thermocouple cools, the voltage disappears, and the valve closes, shutting off the gas supply.

Gas Safe ACS Practice Test

Gas Safe ACS Practice Test

Gas Safe ACS - Accredited Certification Scheme Appliance Safety Devices Questions and Answers