G60 Fire Safety Regulations and Permit Requirements 2

Question 1

Under FDNY regulations, a Certificate of Fitness for torch operations is required when using flammable gases in which setting?

Accepted Answer

Any building or structure under FDNY jurisdiction

Answer

The FDNY C of F for torch use applies to any building or structure within FDNY jurisdiction, not limited to specific building types or heights.

Question 2

Which agency issues the G60 Certificate of Fitness in New York City?

Accepted Answer

NYC Fire Department (FDNY)

Answer

The FDNY issues all Certificates of Fitness, including the G60 for torch use of flammable gases, through its Bureau of Fire Prevention.

Question 3

A hot work permit for torch operations must typically be obtained how far in advance of work beginning?

Accepted Answer

On the same day work begins, before starting

Answer

Hot work permits must be obtained and posted before torch operations begin, generally on the same working day.

Question 4

When a torch operation is completed for the day, the certificate holder must conduct a fire watch for a minimum of how long?

Accepted Answer

30 minutes

Answer

FDNY regulations require a minimum 30-minute fire watch after torch operations cease to detect any smoldering materials.

Question 5

Which FDNY Fire Code section primarily governs hot work operations including torch use?

Accepted Answer

FC 3505

Answer

FC 3505 addresses welding, cutting, and other hot work operations, including torch use with flammable gases.

(G60) Certificate of Fitness for Torch Use of Flammable Gases Practice Test