G60 Basic Codes & Regulations 4

Question 1

Under NYC Administrative Code, who bears legal responsibility if an unqualified worker performs torch operations that cause a fire?

Accepted Answer

Both the employer and the certificate holder may be liable

Answer

Both the employer who assigned unqualified work and any supervising certificate holder can face liability and disciplinary action under NYC Administrative Code.

Question 2

A fuel-gas hose used with a torch must be inspected for defects at minimum:

Accepted Answer

Before each use

Answer

OSHA and manufacturer requirements mandate that fuel-gas hoses be visually inspected for cracks, cuts, and damage before each use.

Question 3

NYC Local Law requires that hot work operations in occupied multiple dwellings be conducted during which hours?

Accepted Answer

During hours approved by building management and posted on the permit

Answer

Permitted hot work hours in occupied multiple dwellings must be approved by building management and specified on the hot work permit.

Question 4

Which regulation prohibits smoking within how many feet of a propane storage area?

Accepted Answer

25 feet

Answer

NFPA 58 prohibits smoking within 25 feet of any LP gas storage area to prevent ignition of leaked vapors.

Question 5

A G60 certificate holder notices that a co-worker is using an oxygen cylinder that has oil on the valve. The correct action is to:

Accepted Answer

Stop work immediately and remove the cylinder from service

Answer

Oil or grease on oxygen equipment creates an extreme fire and explosion hazard — work must stop immediately and the cylinder must be removed from service.

(G60) Certificate of Fitness for Torch Use of Flammable Gases Practice Test

(G60) Certificate of Fitness for Torch Use of Flammable Gases Practice Test

G60 Basic Codes & Regulations 4