G60 Basic Codes & Regulations 3

Question 1

What is the minimum distance a propane cylinder must be kept from an open flame or ignition source during torch operations according to safety codes?

Accepted Answer

10 feet

Answer

Safety codes require propane cylinders to be positioned at least 10 feet away from open flames and ignition sources during torch operations.

Question 2

Before starting torch work inside a building, a G60 certificate holder must inspect the work area primarily to identify:

Accepted Answer

Combustible materials that need protection or removal

Answer

A pre-work inspection must identify combustible materials in the vicinity so they can be removed or shielded before torch operations begin.

Question 3

Under FDNY regulations, a 'fire watch' must remain at the torch work site after operations cease for a minimum of:

Accepted Answer

30 minutes

Answer

FDNY requires a fire watch to monitor the work area for at least 30 minutes after torch operations end to catch any smoldering fires.

Question 4

Which type of fire extinguisher is required to be immediately available during torch operations involving flammable gases?

Accepted Answer

Dry chemical ABC extinguisher

Answer

A dry chemical ABC-rated extinguisher is the required type at torch work sites because it is effective against the range of fire classes likely to occur.

Question 5

A G60 certificate holder is responsible for ensuring which document is present at the job site during all torch operations?

Accepted Answer

The hot work permit

Answer

The hot work permit must be present and accessible at the job site throughout all torch operations as required by FDNY rules.

(G60) Certificate of Fitness for Torch Use of Flammable Gases Practice Test

(G60) Certificate of Fitness for Torch Use of Flammable Gases Practice Test

G60 Basic Codes & Regulations 3