Fusion 360 Drawing and Documentation 2

Question 1

How do you add a Bill of Materials (BOM) table to an assembly drawing in Fusion 360?

Accepted Answer

Use the Parts List command in the Drawing toolbar, which auto-populates from the assembly

Answer

The Parts List command in the Drawing toolbar automatically generates a BOM table populated with component names, quantities, and descriptions pulled directly from the assembly structure.

Question 2

What is the purpose of balloon annotations in a Fusion 360 assembly drawing?

Accepted Answer

To number each component in the drawing view, linking it to the corresponding row in the parts list

Answer

Balloon annotations display item numbers that correspond to rows in the parts list, allowing viewers to identify each component in the assembly drawing.

Question 3

What does 'associativity' mean in the context of Fusion 360 drawings?

Accepted Answer

The drawing views and dimensions remain linked to the 3D model and reflect design changes

Answer

Associativity means drawing views, dimensions, and annotations are parametrically tied to the 3D model geometry, so dimension values update automatically when the model changes.

Question 4

How do you add a center mark to a circular hole in a Fusion 360 drawing view?

Accepted Answer

Use the Center Mark command from the Drawing toolbar and click the circular edge

Answer

The Center Mark command, found in the Drawing toolbar under Geometry, is clicked and then applied to a circular edge to automatically place crossed centerlines at the feature's center.

Question 5

Which dimension type is used to define the angle between two non-parallel edges in a Fusion 360 drawing?

Accepted Answer

Angular dimension

Answer

Angular dimensions measure and display the angle between two line segments or edges, expressed in degrees, which is essential for documenting tapered or angled features.

Fusion 360 Practice Test

Fusion 360 Practice Test

Fusion 360 Drawing and Documentation 2