Fusion 360 Drawing and Documentation 2 — Questions and Answers
Question 1: How do you add a Bill of Materials (BOM) table to an assembly drawing in Fusion 360?
- Use the Insert > Table command and manually enter part information
- Use the Parts List command in the Drawing toolbar, which auto-populates from the assembly (Correct answer)
- Export the design to Excel and paste the BOM as an image
- Right-click the title block and select 'Generate BOM'
Correct answer: Use the Parts List command in the Drawing toolbar, which auto-populates from the assembly
The Parts List command in the Drawing toolbar automatically generates a BOM table populated with component names, quantities, and descriptions pulled directly from the assembly structure.
Question 2: What is the purpose of balloon annotations in a Fusion 360 assembly drawing?
- To call out surface finish requirements on individual faces
- To highlight areas requiring special manufacturing processes
- To number each component in the drawing view, linking it to the corresponding row in the parts list (Correct answer)
- To indicate the view scale for each drawing view
Correct answer: To number each component in the drawing view, linking it to the corresponding row in the parts list
Balloon annotations display item numbers that correspond to rows in the parts list, allowing viewers to identify each component in the assembly drawing.
Question 3: What does 'associativity' mean in the context of Fusion 360 drawings?
- The ability to share drawings with team members via a cloud link
- The drawing views and dimensions remain linked to the 3D model and reflect design changes (Correct answer)
- The capability to associate multiple drawing sheets into a single PDF
- The automatic alignment of drawing views to a common reference point
Correct answer: The drawing views and dimensions remain linked to the 3D model and reflect design changes
Associativity means drawing views, dimensions, and annotations are parametrically tied to the 3D model geometry, so dimension values update automatically when the model changes.
Question 4: How do you add a center mark to a circular hole in a Fusion 360 drawing view?
- Draw two manual lines crossing at the center using the sketch tools
- Use the Center Mark command from the Drawing toolbar and click the circular edge (Correct answer)
- Right-click the hole feature in the browser and select 'Add Center Mark'
- Center marks are added automatically whenever a drawing view is created
Correct answer: Use the Center Mark command from the Drawing toolbar and click the circular edge
The Center Mark command, found in the Drawing toolbar under Geometry, is clicked and then applied to a circular edge to automatically place crossed centerlines at the feature's center.
Question 5: Which dimension type is used to define the angle between two non-parallel edges in a Fusion 360 drawing?
- Linear dimension
- Radial dimension
- Angular dimension (Correct answer)
- Ordinate dimension
Correct answer: Angular dimension
Angular dimensions measure and display the angle between two line segments or edges, expressed in degrees, which is essential for documenting tapered or angled features.
Question 6: What is a 'break view' used for in Fusion 360 drawings?
- To show where a weld joint breaks the continuity of material
- To shorten a long uniform part so it fits on the drawing sheet without reducing scale (Correct answer)
- To indicate where a component is broken away to reveal underlying features
- To split a complex view into two separate halves for clarity
Correct answer: To shorten a long uniform part so it fits on the drawing sheet without reducing scale
A break view removes a middle section of a long, uniform part (such as a shaft or beam) with break symbols, allowing the part to fit on the sheet while maintaining a readable scale.
Question 7: How do you control the tangent edge visibility in a Fusion 360 drawing view?
- Edit the view properties and toggle the Tangent Edge display option between Full, Foreshortened, or Removed (Correct answer)
- Delete the tangent edges manually using the eraser tool
- Tangent edges cannot be hidden in Fusion 360 drawings
- Change the line weight to zero in the drawing style settings
Correct answer: Edit the view properties and toggle the Tangent Edge display option between Full, Foreshortened, or Removed
In the view properties panel, the Tangent Edge option lets you show tangent edges as full lines, as short foreshortened stubs, or remove them entirely to reduce visual clutter.
Fusion 360 Drawing and Documentation 2
How do you add a Bill of Materials (BOM) table to an assembly drawing in Fusion 360?