Free NCCER Basic Safety Test 2
What is the best way to protect yourself when working near moving vehicles and equipment?
Wearing a reflective or high-visibility vest is the best way to protect yourself when working near moving vehicles and equipment. This ensures that you are easily visible to drivers and equipment operators, reducing the risk of accidents and enhancing safety on the job site.
Anything that could have caused an injury or damage, but did not because it was caught in time, is referred to as an _____.
Anything that could have caused an injury or damage, but did not because it was caught in time, is referred to as an incident. Incidents are important to report and investigate to prevent future accidents or injuries in the workplace. This term distinguishes between events that could have led to harm and those that actually resulted in harm.
Which of the following data is included on a material safety data sheet for a hazardous shipment?
A Material Safety Data Sheet (MSDS) provides important information about hazardous substances, including how to handle them safely, their potential health effects, and emergency procedures. One of the critical pieces of information included on an MSDS is how to contact the manufacturer of the substance for further information or in case of an emergency. This contact information ensures that individuals handling the substance can get immediate assistance or clarification if needed.
When gas welding or burning, welders are required to wear tinted goggles or welding hoods with a filter lens of not less than a _____ shade.
When gas welding or burning, welders are required to wear tinted goggles or welding hoods with a filter lens of not less than a No. 4 shade, this darker shade is necessary to protect their eyes from the intense light and UV radiation produced during welding operations, ensuring safety and preventing eye damage.
Prolonged exposure to asbestos can cause lung cancer, asbestosis, and _____.
Prolonged exposure to asbestos can cause serious health conditions such as lung cancer, asbestosis (a chronic lung condition), and mesothelioma, which is a cancer that affects the lining of the lungs, abdomen, or heart. Mesothelioma is specifically associated with asbestos exposure and is a severe and often fatal disease.
A measure of the probability, consequences, and exposure related to an event is referred to as _____.
Risk is a measure that combines the probability of an event occurring, the potential consequences if it does occur, and the exposure or likelihood of encountering the event. It involves assessing potential hazards in the workplace to determine their level of risk and taking appropriate measures to mitigate or manage those risks effectively. Understanding and managing risks is crucial in maintaining a safe work environment.
When performing overhead work on scaffolding, what protective measures must be taken to prevent falling objects from striking a person below?
When performing overhead work on scaffolding, protective measures such as toeboards (installed along the edge of the scaffold platform), debris nets (to catch falling objects), or canopies (overhead coverings) must be used to prevent falling objects from striking a person below. These measures help ensure the safety of workers and others in the vicinity by minimizing the risk of injuries from objects that may accidentally fall from height.
To prevent ear infections, clean your earplugs regularly with:
To prevent ear infections, it is important to clean earplugs regularly with soap and water. This helps remove dirt, earwax, and bacteria that can accumulate on the earplugs, maintaining their effectiveness and hygiene.
If a Code of Federal Regulations Standard does not specifically address a workplace hazard, which of the following must be invoked?
If a Code of Federal Regulations (CFR) Standard does not specifically address a workplace hazard, the general duty clause of the Occupational Safety and Health Act (OSHA) must be invoked. This clause requires employers to provide a workplace free from recognized hazards that are causing or likely to cause death or serious physical harm to employees, even if there is no specific OSHA standard addressing the hazard. It serves as a broad mandate for ensuring workplace safety beyond the scope of specific regulations.
Your personal fall arrest system should be inspected monthly by a(n) _____.
Your personal fall arrest system should be inspected monthly by a competent person. A competent person is someone who is capable of identifying existing and predictable hazards in the surroundings or working conditions that are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them. This regular inspection helps ensure that the fall arrest system is in proper working condition and can effectively protect against falls.
When welding, what color is the oxygen hose?
When welding, the color of the oxygen hose is green. This color coding helps workers easily distinguish between different gas cylinders and their associated hoses to prevent confusion and ensure the safe handling and use of gases during welding operations.