FREE MASS Test Safe Operating Procedures Questions and Answers

Question 1

According to 520 CMR 6.08, what is the FIRST action an operator must perform before starting any hoisting machinery for the day?

Accepted Answer

Perform a complete walk-around of the equipment.

Answer

Test all controls for proper function.

Answer

Check the daily log sheet to ensure it is available.

Answer

Review the manufacturer's load charts.

Question 2

An operator is using a crane with a rotating superstructure near a walkway. Which of the following is a required safety procedure to prevent personnel from entering the swing radius?

Accepted Answer

Erecting barricades or warning lines.

Answer

Sounding the horn before each swing.

Answer

Having a spotter watch the walkway at all times.

Answer

Operating only when the walkway is empty.

Question 3

An operator is instructed by a signal person to lift a load that the operator believes exceeds the crane's rated capacity. What is the correct course of action?

Accepted Answer

Refuse to handle the load until safety has been assured.

Answer

Attempt the lift slowly while monitoring the load moment indicator (LMI).

Answer

Ask the signal person to double-check the load's weight before proceeding.

Answer

Proceed with the lift but document the concern in the daily log.

Question 4

A power failure occurs while an operator is lifting a load. According to Massachusetts regulations, what must the operator do before leaving the equipment?

Accepted Answer

Secure the machine according to manufacturer's specifications.

Answer

Immediately evacuate the cab and report the power failure.

Answer

Attempt to restart the machine's engine.

Answer

Lower the load using the emergency bypass system.

Question 5

Which of the following documents MUST be kept with the hoisting machinery and be readily available at the site for examination by the Department of Public Safety?

Accepted Answer

A written and signed record of all inspections.

Answer

The operator's DOT medical certificate.

Answer

The company's written hoisting safety plan.

Answer

The original bill of sale for the equipment.

Question 6

During an excavation project, what must an operator have before any digging begins, as mandated by safe operating procedures?

Accepted Answer

A Dig Safe permit number, start date, and time.

Answer

A verbal confirmation from the site supervisor that the area is clear.

Answer

A complete set of architectural blueprints for the site.

Answer

A geological survey report of the soil conditions.