Free Maryland MVA Questions and Answers — Questions and Answers

Question 1: How should you proceed from the entry ramp into an expressway?

Use the acceleration lane to blend into the traffic. (Correct answer)
Go down to the bottom of the ramp and stop until it is safe to enter the expressway.
Go down the ramp and cross over to the traffic lane as soon as possible.
None of the above

Correct answer: Use the acceleration lane to blend into the traffic.

You should move into the acceleration lane after entering the entry ramp. This is the side street that connects to the main road.

Question 2: Collisions are more likely to occur when

One vehicle is traveling faster or slower than the flow of traffic. (Correct answer)
All vehicles are traveling about the same speed.
One lane of traffic is traveling faster than the other lanes.
None of the above

Correct answer: One vehicle is traveling faster or slower than the flow of traffic.

You will need to keep passing other automobiles if you are moving faster than the flow of traffic. There is a greater probability of colliding with another vehicle every time you pass one. The vehicle you are passing might lane-change abruptly.

Question 3: This warning indicates:

A logging road is ahead
No trucks are allowed on the hill
There is a steep hill ahead (Correct answer)
None of the above

Correct answer: There is a steep hill ahead

This road sign warns drivers that a sharp slope is coming up, so they should prepare for the climb by putting their vehicles in the appropriate gear. These signs are typically encountered on mountainous roads where a strong ascent and descent are expected parts of travel.

Question 4: Driving at night is riskier than driving during the day because

You cannot see as far ahead at night. (Correct answer)
Your reaction time is slower at night.
The road is probably more slippery at night.
None of the above

Correct answer: You cannot see as far ahead at night.

Driving at night is riskier than driving during the day. Headlight glare can be dazzling, visibility is reduced in low light, and drivers are more likely to be fatigued and react slowly. These characteristics make nighttime driving difficult and increase the likelihood of major accidents.

Question 5: While operating a vehicle on a road with a single broken white line:

You must stay within your lane
You may change lanes only if in the left lane
You may cross it to change lanes (Correct answer)
None of the above

Correct answer: You may cross it to change lanes

Another marking that separates two-lane roadways into a right and left side is this one. The distinction is that, provided they do so carefully, vehicles can pass one another in areas split by the broken white center line.

Question 6: This traffic sign indicates:

Railroad Crossing
Railroad Crossing
Intersection (Correct answer)
None of the above

Correct answer: Intersection

This side road sign alerts users of an intersection coming up so they can be alert to vehicles entering or leaving the highway.

Question 7: In your direction, there are two lanes of traffic. Many cars are passing you on the right as you travel in the left lane. If the person driving in front of you wants to go quicker, you should:

Move over into the right lane when it is safe (Correct answer)
Drive onto the left shoulder to let the other vehicles pass
Stay in your lane so you don't impede the traffic flow
None of the above

Correct answer: Move over into the right lane when it is safe

When it is safe to do so and unless you are about to make a left turn, you should move into the right lane. It is impossible for two moving cars in the same lane, direction, and speed to collide. Drivers who travel faster or slower than other vehicles on the road frequently cause traffic accidents involving two or more vehicles.

Question 8: Traffic Signs: What color will the backdrop of the sign be if it conveys road user services like food, petrol, and rest areas? Red arrows are only used for protected turn lanes

True
False (Correct answer)

Correct answer: False

The backdrop color of a traffic sign that conveys road user services like food, petrol (gasoline), and rest areas is typically blue. The blue color is used for informational signs that provide services and facilities to road users, such as food and rest stops, gas stations, hospitals, and other amenities. Blue signs are intended to provide helpful information and guidance to drivers.

Question 9: How many points must your license have before you can take the driving test?

Use low beams, they won't cause glare or reflection that could impair visibility and if you have them use fog lights
-If it is safe to do so -The other vehicle is about to make a left turn -You can stay on the roadway when passing to the left
-Steer in the direction of the skid -Do not use your brakes Take your foot off the gas
-Your vehicle must have valid license plates and registration -Proof of Insurance -Your vehicle must be in safe operating condition (Correct answer)

Correct answer: -Your vehicle must have valid license plates and registration -Proof of Insurance -Your vehicle must be in safe operating condition

The number of points required on a driver's license before taking the driving test can vary depending on the specific regulations and laws of the jurisdiction you are in. Different regions or countries may have different requirements for obtaining a driver's license and taking the driving test.

Question 10: Driving 101: At 60 mph, an accident is _ times more likely to result in death than at 20 mph.

That you turn on your headlights when you are using your windshield wipers
500 feet
8 (Correct answer)
Drivers do not see as far, as soon, or as much and everything looks different

Correct answer: 8

Because kinetic energy rises with the square of speed, tripling speed from 20 to 60 mph roughly multiplies impact energy ninefold, making a crash about 8 times more likely to be fatal. The other choices describe unrelated rules (headlights with wipers, stopping distance, reduced night vision) rather than the speed-to-fatality relationship.

Question 11: What does a flashing red light on a traffic signal mean?

-Steer in the direction of the skid -Do not use your brakes Take your foot off the gas
-Come to a complete stop at the stop line -Yield to all traffic and pedestrians -Proceed when the way is clear (Correct answer)
Red arrows are only used for protected turn lanes
-Ease your foot off the gas -Do not apply the brakes -Allow the vehicle to slow to a manageable speed -Maintain the direction of the vehicle

Correct answer: -Come to a complete stop at the stop line -Yield to all traffic and pedestrians -Proceed when the way is clear

A flashing red light is treated exactly like a stop sign: come to a complete stop at the stop line, yield to all traffic and pedestrians, and proceed only when the way is clear. The other options describe skid recovery or red-arrow rules, which do not apply to a flashing red signal.

Question 12: What do the red lights at a train crossing that are flashing mean?

Have headlights turned on and hazards lights flashing in order to be granted the right-of-way
A fine that is higher than a regular fine for speeding
A driver must come to a complete stop until lights stop flashing (Correct answer)
When an open alchohol container is in the passenger area of the vehicle

Correct answer: A driver must come to a complete stop until lights stop flashing

When the red lights at a train crossing are flashing, it means that a train is approaching, and drivers must come to a complete stop until the lights stop flashing and the crossing is clear. It is essential to obey this signal to ensure safety and prevent accidents at railroad crossings. Trains have the right of way at these crossings, and it's crucial for drivers to be patient and wait until it's safe to proceed. Disregarding the flashing red lights at a railroad crossing is not only illegal but also extremely dangerous. Always exercise caution and follow traffic rules at train crossings.

Question 13: What is riskier and more challenging for drivers than nighttime driving?

Driving at night (Correct answer)
With increased speed
Traffic already in the roundabout
The interstate sign

Correct answer: Driving at night

Driving in adverse weather conditions, such as heavy rain, snow, ice, fog, or strong winds, is riskier and more challenging for drivers than nighttime driving.

Question 14: Work Zones: What color is most of the traffic control devices used in work zones?

The Interstate Sign
Highway Markings
Orange (Correct answer)
Blue

Correct answer: Orange

In work zones, most of the traffic control devices, including cones, barrels, signs, and vests worn by workers, are colored orange. Orange is chosen because it is highly visible, especially during the day, and helps to alert drivers to the presence of construction or maintenance work on the road. These orange traffic control devices are essential in ensuring the safety of both workers and drivers in and around work zones.

Question 15: Keep an eye out for turning trucks. Where do trucks need more room while making wide turns?

Intersections (Correct answer)
Stopping
Blue
The Interstate Sign

Correct answer: Intersections

Trucks need more room while making wide turns at intersections. Due to their large size and longer wheelbase, trucks require additional space to navigate safely around corners. When making turns at intersections, trucks often need to swing wide to accommodate their size, and they may temporarily occupy multiple lanes during the turning maneuver.

Question 16: What does a flashing yellow light on a traffic signal mean?

If you are not yet 21 years of age
Red arrows are only used for protected turn lanes
-Following too closely -Sounding your horn
-Slow down -Proceed with caution (Correct answer)

Correct answer: -Slow down -Proceed with caution

A flashing yellow light on a traffic signal means "Proceed with caution." When you encounter a flashing yellow light, you should be cautious and ready to yield the right-of-way if necessary. Unlike a solid yellow light, which signals drivers to prepare to stop before the light turns red, a flashing yellow light indicates that you should slow down and proceed through the intersection with caution. It is commonly used at certain intersections or pedestrian crossings to alert drivers to potential hazards and to remind them to be watchful for pedestrians and other vehicles.

Free Maryland MVA Questions and Answers

How should you proceed from the entry ramp into an expressway?