FREE FireTEAM Information Ordering Questions and Answers

Question 1

You are the first firefighter to reach a person who has collapsed in a public park. They are unresponsive. Arrange the following actions in the correct logical sequence.
1. Check for breathing and a pulse.
2. Ensure the scene is safe for you to approach.
3. Begin chest compressions if no pulse is found.
4. Call for medical backup and an AED.

Accepted Answer

2, 1, 4, 3

Answer

The universally taught sequence for emergency response is to first ensure your own safety. After the scene is safe, you assess the patient's condition, immediately call for more advanced help, and then begin treatment based on your assessment.

Question 2

A fire alarm has sounded in the station for a structure fire. Arrange the following steps a firefighter takes from the moment the alarm sounds to arriving at the scene.
1. Receive the address and incident details from dispatch while en route.
2. Board the fire apparatus.
3. Quickly and safely don personal protective equipment (PPE).
4. The apparatus leaves the station and proceeds to the scene.

Accepted Answer

3, 2, 4, 1

Answer

The sequence is dictated by efficiency and safety. A firefighter must put on their gear first to be protected and ready. They then board the apparatus, which can then depart; obtaining details en route is standard practice to minimize response time.

Question 3

You need to properly clean and inspect a Self-Contained Breathing Apparatus (SCBA) mask after use. Put these steps in the correct order.
1. Visually inspect straps, lenses, and seals for any damage.
2. Wash the mask with mild soap and warm water to remove soot and debris.
3. Rinse the mask thoroughly with clean water.
4. Submerge the mask in a disinfecting solution, then give a final rinse and let dry.

Accepted Answer

2, 3, 4, 1

Answer

The correct procedure is to first remove all physical contaminants by washing and rinsing. Disinfection is the next step, followed by a final inspection to check for damage that may have been hidden by dirt or soot.

Question 4

You are tasked with deploying a fire hose from the engine to the front door of a building. Arrange the following actions in the proper sequence.
1. Connect the hose to a discharge port on the fire engine.
2. Signal for the pump operator to charge the hoseline with water.
3. Pull the hose from the hose bed and carry it towards the building.
4. Check the nozzle to ensure it is closed before calling for water.

Accepted Answer

1, 3, 4, 2

Answer

The sequence ensures a controlled and safe operation. You must connect the hose to the truck first, then stretch it to where it's needed. The most critical safety check is ensuring the nozzle is closed before introducing hundreds of pounds of water pressure into the line.

Question 5

A citizen has arrived at the fire station with a minor injury to their arm. Your station provides basic first aid. What is the correct sequence of actions?
1. Document the incident in the station's logbook.
2. Assess the injury to determine its severity.
3. Clean the wound and apply a sterile dressing.
4. Put on a pair of medical gloves.

Accepted Answer

4, 2, 3, 1

Answer

This follows the standard 'Body Substance Isolation' (BSI) protocol, where you protect yourself first by donning gloves. You then assess the patient's needs, provide the care required, and complete documentation as the final step.

FireTEAM Practice Test Practice Test

FireTEAM Practice Test Practice Test

FREE FireTEAM Information Ordering Questions and Answers