Free F01 Out-of-Service System Tagging Questions and Answers 1 — Questions and Answers
Question 1: What does a red tag placed on a fire protection system indicate?
- The system is undergoing routine testing
- The system is fully out of service and non-functional (Correct answer)
- The system is partially impaired but may still operate
- The system has been recently repaired and is awaiting inspection
Correct answer: The system is fully out of service and non-functional
A red tag signifies that the entire system or a major component is completely out of service and will not function in a fire. This is the most serious level of impairment and requires immediate action, including establishing a fire watch.
Question 2: Where must an out-of-service tag be placed for a sprinkler system?
- Only on the building's front door
- In the building manager's office
- On the main control valve and the Fire Department connection (Correct answer)
- On the highest floor of the building
Correct answer: On the main control valve and the Fire Department connection
Tags must be placed in conspicuous locations to alert personnel and first responders. The primary locations are the main control valve for the system and the Fire Department connection (FDC) outside the building.
Question 3: An orange tag is placed on a fire protection system. What does this signify?
- The system is fully out of service
- The system is obsolete and needs replacement
- The system has a non-critical defect or is partially out of service (Correct answer)
- The system is new and has not been commissioned yet
Correct answer: The system has a non-critical defect or is partially out of service
An orange tag indicates a partial impairment. This means a part of the system is defective or out of service, but other parts may still function as intended. It is a less critical condition than a red tag, but still requires attention.
Question 4: Who is authorized to remove an out-of-service tag from a system?
- Any on-duty Fire Guard
- The first FDNY member to arrive on scene
- An authorized person who has restored the system to service (Correct answer)
- The building owner
Correct answer: An authorized person who has restored the system to service
Only authorized personnel from the fire alarm company or building engineering staff who have restored the system to service can remove the tag. A Fire Guard's duty is to patrol, not to service or tag the system.
Question 5: A single sprinkler head on a floor with 50 heads is found to be defective and is shut down. What color tag should be used?
- A red tag, because part of the system is not working
- An orange tag, as it is a partial impairment (Correct answer)
- A green tag, to indicate the rest of the system is okay
- No tag is needed for a single head
Correct answer: An orange tag, as it is a partial impairment
Since the vast majority of the sprinkler system on that floor is still operational, this is considered a partial impairment. Therefore, an orange tag is the appropriate choice to indicate the non-critical defect.
Question 6: What is the purpose of the disc placed in the Fire Department Connection when a system is out of service?
- To prevent debris from entering the connection
- To indicate the system is fully functional
- To inform firefighters that the system is unreliable or out of service (Correct answer)
- To indicate the type of fluid used in the sprinkler system
Correct answer: To inform firefighters that the system is unreliable or out of service
A white disc is placed in the FDC to physically signal to arriving firefighters that the system is out of service. This prevents them from wasting precious time and water trying to pump into a non-functional system.
Free F01 Out-of-Service System Tagging Questions and Answers 1
What does a red tag placed on a fire protection system indicate?