DGT Traffic Signs & Signals

Question 1

What does a red octagonal sign indicate?

Accepted Answer

Stop completely before proceeding.

Answer

A red octagonal sign is universally recognized as a 'STOP' sign, indicating that drivers must come to a complete halt before the stop line or crosswalk. This specific shape and color are designed for immediate recognition, even in adverse conditions, to ensure safety at intersections. Drivers must stop completely, check for cross-traffic or pedestrians, and only proceed when it is safe to do so.

Question 2

What does a yellow diamond-shaped sign usually indicate?

Accepted Answer

Warns about road hazards or changes.

Answer

A yellow diamond-shaped sign is a standard warning sign, alerting drivers to potential road hazards or changes ahead. These signs are used to indicate conditions such as curves, slippery roads, merging traffic, or pedestrian crossings. Their purpose is to give drivers advance notice, allowing them to adjust their speed and driving behavior accordingly for safety.

Question 3

What does a flashing red traffic light mean?

Accepted Answer

Stop completely and proceed when safe.

Answer

A flashing red traffic light functions identically to a stop sign, requiring drivers to come to a complete stop before the intersection or crosswalk. After stopping, drivers must yield to any cross-traffic or pedestrians and only proceed when it is safe and clear to do so. This signal is often used at intersections where a full stop is necessary but a continuous red light might not be warranted.

Question 4

What should a driver do when approaching a yellow traffic signal?

Accepted Answer

Slow down and prepare to stop.

Answer

When approaching a yellow traffic signal, a driver should slow down and prepare to stop, as the light is about to turn red. The yellow light serves as a warning phase, giving drivers sufficient time to safely bring their vehicle to a halt before entering the intersection. Only proceed through a yellow light if stopping safely would require an abrupt stop or if you are already too close to the intersection to stop.

Question 5

What does a blue road sign typically indicate?

Accepted Answer

Provides general information or services.

Answer

Blue road signs typically provide general information or indicate services available to drivers. These signs often direct motorists to hospitals, rest areas, gas stations, lodging, or tourist attractions. They are designed to assist drivers with navigation and access to essential services, enhancing convenience and safety on the road.

(DGT) Directorate-General for Traffic Test Practice Test

(DGT) Directorate-General for Traffic Test Practice Test

DGT Traffic Signs & Signals