CH Tides, Water Levels & Vertical Datums

Question 1

What is the primary cause of ocean tides on Earth?

Accepted Answer

Gravitational forces of the moon and sun

Answer

The primary cause of ocean tides is the gravitational pull exerted by the Moon and, to a lesser extent, the Sun on Earth's oceans. The Moon's gravity creates bulges of water on both the side of Earth facing the Moon and the opposite side. As Earth rotates, these bulges create the rhythmic rise and fall of sea levels we observe as tides.

Question 2

What is Mean Lower Low Water (MLLW)?

Accepted Answer

Average of the lower low tides each day over 19 years

Answer

Mean Lower Low Water (MLLW) is a specific tidal datum defined as the average of the lower of the two low tides occurring each day, observed over a specific 19-year National Tidal Datum Epoch. This datum is crucial for hydrographic charting in the U.S. as it represents a conservative reference plane for navigation, ensuring that charted depths are typically deeper than the actual water level.

Question 3

Which instrument is commonly used to measure water levels over time?

Accepted Answer

Tide gauge

Answer

A tide gauge is an instrument specifically designed to continuously measure and record water levels over time at a fixed location. These measurements are essential for understanding tidal patterns, establishing vertical datums, and providing real-time or predicted tide corrections for hydrographic surveys. Modern tide gauges often use acoustic or radar sensors to determine water surface elevation.

Question 4

Why are vertical datums important in hydrography?

Accepted Answer

They provide a height reference for soundings

Answer

Vertical datums are fundamental in hydrography because they establish a common, consistent reference surface from which all measured depths (soundings) are reported. Without a defined vertical datum, depths would be relative to an arbitrary water level, making it impossible to compare measurements, create accurate nautical charts, or ensure safe navigation. They ensure all depths are standardized to a specific plane, like MLLW.

Question 5

Which vertical datum is used for referencing water depths in U.S. nautical charts?

Accepted Answer

Mean Lower Low Water

Answer

In the United States, Mean Lower Low Water (MLLW) is the standard vertical datum used for referencing water depths on nautical charts. This datum represents the average of the lower of the two daily low tides over a 19-year period. Using MLLW ensures that charted depths provide a conservative estimate of the minimum water available for navigation, enhancing safety for mariners.

(CH) Certified Hydrographer Practice Test

(CH) Certified Hydrographer Practice Test

CH Tides, Water Levels & Vertical Datums