Free Caliper MCQ Objective Questions and Answers — Questions and Answers
Question 1: The caliper known as is used to determine the center of round bars.
- Spring Joint Calipers
- Firm Joint Calipers
- All the above
- Jenny Calipers (Correct answer)
Correct answer: Jenny Calipers
Jenny calipers, also known as oddleg or hermaphrodite calipers, have one leg pointed and the other bent. This unique design allows them to be used for scribing lines parallel to an edge or, more specifically, for accurately locating the center of round or square bars by scribing arcs from the circumference. Their distinct shape makes them ideal for this specific task.
Question 2: Which of the following kinds of calipers is used to draw parallel lines to borders on both the inside and outside?
- Inside caliper
- Outside caliper
- Jenny caliper (Correct answer)
- Firm joint caliper
Correct answer: Jenny caliper
Jenny calipers, also known as oddleg or hermaphrodite calipers, are specifically designed for layout work. They feature one fixed leg and one adjustable leg with a pointed end, allowing them to accurately scribe lines parallel to an edge. This capability applies to both inside and outside borders, making them ideal for marking out workpieces.
Question 3: Vernier calipers' lowest count is determined by the following:
- Difference between a main scale division and a Vernier scale division (Correct answer)
- Ratio of a main scale division and Vernier scale division
- Sum of a main scale division and a Vernier scale division
- Product of a main scale division and a Vernier scale division
Correct answer: Difference between a main scale division and a Vernier scale division
The least count (LC) of a Vernier caliper is defined as the smallest measurement that can be accurately read by the instrument. It is fundamentally calculated as the difference between the value of one main scale division (MSD) and the value of one Vernier scale division (VSD). This difference represents the smallest discernible change in measurement the caliper can detect.
Question 4: Calipers that come with the heel or regular leg are referred to as:
- Firm and spring joint calipers
- Firm joint calipers
- Hermaphrodite calipers (Correct answer)
- Spring joint calipers
Correct answer: Hermaphrodite calipers
Hermaphrodite calipers, also known as Jenny calipers or oddleg calipers, are characterized by their unique leg configuration. They have one leg that is straight and pointed (the regular leg) and the other leg that is bent or has a heel. This design makes them suitable for scribing lines parallel to an edge and for finding the center of round stock.
Question 5: The metric system's minimum vernier caliper count is
- 0.02 mm (Correct answer)
- 0.001 mm
- 0.01 mm
- 0.06 mm
- 0.05 mm
Correct answer: 0.02 mm
The 'minimum count' or least count of a measuring instrument indicates its precision. For a standard metric Vernier caliper, the most common and widely accepted least count is 0.02 mm. This precision is achieved through the specific graduation of its main and Vernier scales, allowing for fine measurements.
Question 6: A vernier caliper's lowest count will be 19 (19 mm) major scale divisions divided into 20 equally spaced divisions.
- 0.019
- 0.05 (Correct answer)
- 0.02
- 0.01
Correct answer: 0.05
The least count (LC) of a Vernier caliper is calculated as the difference between one main scale division (MSD) and one Vernier scale division (VSD). In this scenario, 20 Vernier scale divisions (VSD) are equal to 19 main scale divisions (MSD). If 1 MSD = 1 mm, then 1 VSD = 19/20 mm = 0.95 mm. Therefore, the least count is 1 MSD - 1 VSD = 1 mm - 0.95 mm = 0.05 mm.
Question 7: Name the device used to gauge block step height.
- Outside micrometer
- Tube micrometer
- Inside micrometer
- Depth micrometer (Correct answer)
Correct answer: Depth micrometer
A depth micrometer is a precision measuring instrument specifically designed to accurately measure the depth of holes, slots, and steps. It features a spindle that extends from a flat base, allowing it to precisely gauge the distance from a reference surface to a lower surface. This makes it ideal for determining block step heights.
Free Caliper MCQ Objective Questions and Answers
The caliper known as is used to determine the center of round bars.