Free Caliper Cognitive Questions and Answers — Questions and Answers
Question 1: Slot width or hole between the smaller caliper faces.
- Blade
- Outside length
- Stepped length
- Inside length (Correct answer)
Correct answer: Inside length
Calipers are versatile measuring tools capable of taking various dimensions. The 'inside length' refers to the measurement taken using the smaller, upper jaws of a caliper, which are specifically designed to fit into a slot or hole. This allows for accurate determination of internal dimensions, such as the diameter of a bore or the width of a groove.
Question 2: Most used and reliable measuring device.
- Dial indicator
- Micrometer
- Dial caliper (Correct answer)
- Inside micrometer
Correct answer: Dial caliper
The dial caliper is widely regarded as one of the most used and reliable measuring devices in many industries, including machining and engineering. Its combination of accuracy, ease of use, and ability to measure outside, inside, depth, and step dimensions makes it highly versatile. While micrometers offer higher precision, dial calipers provide an excellent balance of accuracy and speed for general measurements.
Question 3: -Four measures -Exterior dimension or item thickness -The internal diameter or room width -Steps per minute -Depth of the hole
- Dial caliper limit
- Blade
- Outside length
- Dial caliper measurements (Correct answer)
Correct answer: Dial caliper measurements
A dial caliper is a highly versatile measuring tool known for its ability to take four distinct types of measurements. These include exterior dimensions (using the main jaws), internal diameter (using the smaller jaws), step measurements (using the end of the sliding jaw), and depth of a hole (using the depth rod). The listed options accurately describe these comprehensive capabilities, making 'Dial caliper measurements' the correct encompassing term.
Question 4: More than 6 inches will be measured using a standard inch caliper.
- Dial caliper measurements
- Pointer
- Depth
- Dial caliper limit (Correct answer)
Correct answer: Dial caliper limit
Standard dial calipers typically have a maximum measuring range, often around 6 inches (or 150mm). If a measurement exceeds this range, a standard caliper cannot be used, indicating its 'dial caliper limit.' For larger measurements, specialized calipers with extended ranges or other measuring tools would be required.
Question 5: As the slider is moved along a track, it keeps track of more significant increments (up to 100 in).
- Internal measuring jaws
- Locking screw
- Zeroing know
- Reference edge (Correct answer)
Correct answer: Reference edge
The reference edge, often part of the main scale or beam of a caliper, is the fixed part against which the slider moves. As the slider is moved, its position relative to this reference edge indicates the larger increments of the measurement. This interaction allows for reading the main scale value before consulting the Vernier or dial for finer divisions.
Question 6: Adjusts the distance between the measurement surface while moving the blade. <br> Answer: Slider
- TRUE (Correct answer)
- FALSE
Correct answer: TRUE
The slider is the movable component of a caliper that carries the measuring jaws and the Vernier scale or dial. By moving the slider along the main beam (often referred to as the blade), the distance between the measurement surfaces is adjusted. This action directly facilitates taking various dimensions, making the statement true.
Question 7: Outside diameter or object thickness between caliper faces. <br> Answer: Inside length
- TRUE
- FALSE (Correct answer)
Correct answer: FALSE
The statement describes measuring the 'outside diameter or object thickness,' which is typically performed using the *outside jaws* of a caliper. The term 'inside length' specifically refers to measurements taken of internal dimensions, such as the diameter of a hole or the width of a slot, using the *inside jaws*. Therefore, the given answer 'Inside length' is incorrect for the described measurement.
Free Caliper Cognitive Questions and Answers
Slot width or hole between the smaller caliper faces.