Basic ELDT 1

Question 1

As part of a pre-trip inspection, the driver should approach a car and check below for everything listed below, with the exception of:

Accepted Answer

Windshield wiper fluid

Answer

During a pre-trip inspection, a driver should check for leaks of fluids like oil, grease, and coolant underneath the vehicle, as these indicate potential mechanical issues. Windshield wiper fluid, however, is contained within a reservoir and is not typically checked by looking for leaks on the ground. Its level is usually checked by visually inspecting the reservoir or using a dashboard indicator.

Question 2

You should refrain from blowing your horn:

Accepted Answer

alert other drivers that they made a mistake

Answer

The horn is a safety device intended to warn others of potential danger or to make your presence known. It should not be used to express anger or frustration, such as alerting other drivers that they made a mistake. Using the horn aggressively can escalate situations and is not its intended purpose.

Question 3

Which of the following DOES NOT indicate that you are tired?

Accepted Answer

Starting a discussion with a passenger

Answer

Starting a discussion with a passenger can actually help keep a driver alert and engaged, especially on long trips, and is not an indicator of fatigue. In contrast, yawning repeatedly, having difficulty keeping one's head up, and having trouble recalling recent miles are all classic signs of driver fatigue. These symptoms indicate a dangerous level of tiredness that impairs driving ability.

Question 4

Engine belt looseness will:

Accepted Answer

improperly turning the fan and/or water pump, which will cause an overheating incident.

Answer

Loose engine belts can prevent critical components like the fan and water pump from turning properly. The fan is essential for cooling the engine, and the water pump circulates coolant. If these components are not functioning correctly due to a loose belt, the engine will quickly overheat, potentially causing severe damage.

Question 5

The majority of large cars need ________ shift gears.

Accepted Answer

double clutching

Answer

The majority of large commercial vehicles, especially older models or those with non-synchronized transmissions, require double clutching to shift gears smoothly and efficiently. This technique involves pressing the clutch, shifting to neutral, releasing the clutch, matching engine RPMs, pressing the clutch again, and then shifting into the next gear. It ensures proper gear engagement and prevents transmission damage.

Entry Level Driver Training (ELDT) Practice Test

Entry Level Driver Training (ELDT) Practice Test

Basic ELDT 1