What's the actual passing score for NETTCP? Getting conflicting info

Went through this exact question when I was prepping. The NETTCP material on "NETTCP" is actually not as bad as it looks — once it clicks it clicks.

What helped me was finding one resource that explained it from first principles instead of just giving me the "right answer." Made a huge difference on the scenario-based questions.

Also: don't underestimate the importance of reviewing your wrong answers more than your right ones. I learned more from 20 wrong answers than 200 correct ones.

Appreciate everyone sharing their experience here. I'm 4 weeks out from my NETTCP exam date and feeling more confident after reading this. The consensus on exam prep being the hardest section matches what I'm seeing in my practice scores — going to put extra time there this week.

Great discussion here. One thing I'd add that hasn't come up: sleep the night before is genuinely more important than one more study session. I went in fully rested for my NETTCP and felt sharper on the study guide questions than I expected. Don't underestimate recovery time.

I went through this same confusion a few months back while studying on lunch breaks and after the kids were in bed. The short answer is 70% is the standard passing score for NETTCP, and I didn't find any real state-by-state variation once I dug into the official ACI materials. You might be seeing outdated forum posts mixing it up with other certifications. For practice I used nettcp concrete testing resources online and that helped me figure out exactly what topics to focus on.

Fitting it in part-time wasn't easy but it's doable. I'd do 20-30 minutes during lunch and maybe an hour on weekends. Honestly the consistency mattered more than long study sessions. Don't overthink the score threshold, just make sure you're solid on slump, air content, and cylinder making procedures and 70% will feel very reachable.

I failed my first attempt and honestly it wasn't the passing score that tripped me up, it was assuming I knew the material better than I did. The score requirement is 70% but that's kind of misleading because the questions are way more specific than you'd expect. Second time around I spent a lot more time on the hands-on procedures and mix design stuff using nettcp concrete testing practice questions, and that made a huge difference.

Don't overthink the state variation thing. It's 70% across the board for the standard cert. Just make sure you're drilling the actual test procedures, not just reading definitions.