Racking and Storage Flashcards
6 cards from real TLILIC0003 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Racking and Storage flashcards as text
In Australian Australian forklift operations and WHS, what is the primary purpose of Racking and Storage procedures?
Answer: To protect worker health and safety through systematic hazard management
Racking and Storage procedures are fundamental to protecting workers under Australian Australian forklift operations and WHS regulations.
Under Australian regulations, who bears primary responsibility for Racking and Storage compliance?
Answer: The PCBU (Person Conducting a Business or Undertaking)
The PCBU has the primary duty under the WHS Act to ensure compliance with all safety requirements.
What is the first step in a Racking and Storage risk assessment?
Answer: Identify all hazards associated with ${subjectName}
Hazard identification is always the first step — you cannot assess or control risks you have not identified.
How should Racking and Storage incidents be reported in an Australian workplace?
Answer: Report immediately to the supervisor, with notifiable incidents reported to the regulator
Incidents must be reported promptly, with notifiable incidents requiring immediate regulator notification.
What documentation must be maintained for Racking and Storage activities?
Answer: Risk assessments, training records, incident reports, and inspection logs as required by WHS Regulations
WHS Regulations require maintaining various records for compliance, auditing, and incident investigation purposes.
What training is required before workers perform Racking and Storage activities?
Answer: Appropriate training covering hazards, procedures, equipment use, and emergency response
Workers must receive comprehensive training appropriate to the risks before performing the activity.