Forklift certification Certification Forklift 4

Question 1

What is the 'load center' on a forklift data plate?

Accepted Answer

The distance from the front face of the forks to the load's center of gravity

Answer

The middle of the operator's seat

Answer

The center of the rear axle

Answer

The height of the mast

Question 2

As the load center distance increases, the forklift's capacity does what?

Accepted Answer

Decreases

Answer

Increases

Answer

Stays the same

Answer

Becomes unlimited

Question 3

Which forklift class uses electric motors and is commonly used indoors for reduced emissions?

Accepted Answer

Class I electric rider trucks

Answer

Internal combustion trucks only

Answer

Rough terrain trucks

Answer

Diesel tractors

Question 4

What should you do if you must operate a forklift near the edge of a loading dock?

Accepted Answer

Keep a safe distance from the edge and use dock plates/wheel chocks

Answer

Drive as close to the edge as possible for speed

Answer

Remove the seatbelt for a fast exit

Answer

Raise the load to see the edge better

Question 5

What hazard is created by carrying a load that blocks your forward vision?

Accepted Answer

Inability to see pedestrians and obstacles

Answer

Improved stability

Answer

Faster travel speed

Answer

Better fuel economy

Question 6

How should a propane (LPG) forklift cylinder be checked before use?

Accepted Answer

Inspect for leaks, secure mounting, and proper valve orientation

Answer

Only check the fuel gauge

Answer

Shake the cylinder to test level

Answer

Ignore it if the truck starts

Question 7

What is the recommended action when refueling or recharging a forklift?

Accepted Answer

Turn off the engine, avoid ignition sources, and follow procedures

Answer

Keep the engine running and smoke to pass time

Answer

Refuel while carrying a load

Answer

Recharge in an unventilated closet