Forklift Instructions Flashcards
7 cards from real Forklift certification Certification practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Forklift Instructions flashcards as text
Before starting a forklift shift, what must the operator complete first?
Answer: A pre-operation inspection
OSHA requires a daily pre-operation inspection before the forklift is used.
If a forklift is found defective during inspection, the operator should:
Answer: Take it out of service and report it
A defective forklift must be removed from service until repaired.
When traveling with a load, the forks should be:
Answer: Low and tilted slightly back
Carrying a load low and tilted back improves stability and control.
What should an operator do when approaching a blind intersection?
Answer: Sound the horn and slow down
Sounding the horn and slowing warns others and prevents collisions.
The load capacity of a forklift is found on the:
Answer: Data (capacity) plate
The manufacturer's data plate lists the rated load capacity.
When driving on a ramp with a loaded forklift, the operator should:
Answer: Drive forward up, forks pointing upgrade
With a load, travel up ramps forward and down ramps in reverse to keep the load stable.
Seat belts on a sit-down forklift should be worn:
Answer: Whenever operating the truck
Seat belts keep the operator within the protective cage during a tip-over.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- osha.gov — Test delivery, eligibility, renewal · verified Oct 2026