Forklift Flashcards
7 cards from real Forklift certification Certification practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Forklift flashcards as text
What is the primary purpose of the counterweight on a sit-down counterbalance forklift?
Answer: To offset the weight of the load being lifted
The counterweight balances the load on the forks to keep the truck stable and prevent tipping forward.
When traveling with a load, the forks should be tilted in which direction?
Answer: Tilted back toward the mast
Tilting the mast back cradles the load and helps keep it secure while traveling.
What should you do before driving a forklift down a ramp with a load?
Answer: Drive in reverse with the load pointed uphill
On a ramp with a load, keep the load pointed uphill and travel in reverse when going down to prevent the load from sliding off or the truck tipping.
How often must a forklift operator inspect the truck according to OSHA?
Answer: Before each shift or when it is used
OSHA requires forklifts to be examined at least daily, or after each shift when used around the clock.
What is the 'stability triangle' on a counterbalance forklift?
Answer: The area formed by the two front wheels and the center of the rear axle
The stability triangle connects the two front wheels and the rear axle pivot; the combined center of gravity must stay inside it to remain stable.
If a forklift starts to tip over, what should a seated operator do?
Answer: Stay in the seat, hold on, and lean away from the fall
Operators should stay belted in the seat, brace, and lean away from the direction of the tip rather than jumping.
What does a data plate (nameplate) on a forklift primarily tell the operator?
Answer: The rated load capacity and attachment information
The data plate lists the truck's rated capacity, load center, and any attachment ratings the operator must not exceed.