Practice Test GeeksFAA - Sectional Chart Practice Test
← All FAA Flashcard Decks

Airspace Classification Flashcards

6 cards from real FAA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Airspace Classification flashcards as text

  1. On a sectional chart, Alert Areas are depicted to inform pilots of what?

    Answer: Areas with a high volume of pilot training or unusual aerial activity

    Alert Areas shown on sectional charts notify pilots of areas with high volumes of pilot training flights or unusual types of aerial activity that may pose a hazard.

  2. A Temporary Flight Restriction (TFR) would appear on a sectional chart as what type of symbol?

    Answer: It is NOT shown on paper sectional charts — check NOTAMs

    TFRs are dynamic and time-limited, so they are NOT depicted on paper sectional charts; pilots must check NOTAMs for current TFR information.

  3. On a sectional chart, what does a blue dashed box around an airport with altitudes shown represent?

    Answer: Class D airspace with ceiling altitude

    A dashed blue circle or box with a ceiling altitude in MSL shown inside or nearby represents Class D airspace associated with an airport's control tower.

  4. What minimum equipment is required to enter Class C airspace according to FAA regulations?

    Answer: Mode C transponder and two-way radio

    Class C airspace requires a two-way radio for communication with ATC and a Mode C transponder (or ADS-B Out with altitude reporting) for entry.

  5. How is an Air Defense Identification Zone (ADIZ) depicted on a sectional chart?

    Answer: Dashed blue line along coastlines

    The ADIZ is depicted on sectional charts as a dashed blue line along coastal and border areas where all aircraft must have filed flight plans and be transponder-equipped.

  6. What does a number inside a Class B, C, or D airspace segment shown as, for example, '40' over '30' mean on a sectional chart?

    Answer: Ceiling 4,000 feet MSL, floor 3,000 feet MSL

    Altitude numbers in airspace segments are expressed in hundreds of feet MSL, so '40' over '30' means the segment has a ceiling of 4,000 feet MSL and a floor of 3,000 feet MSL.