F80 F80 Inspection Procedures 5

Question 1

An F80 inspector notices the vehicle's anti-lock braking system (ABS) warning light is illuminated. What is the correct action?

Accepted Answer

Record the fault and reject the vehicle, as ABS is a required safety system

Answer

Pass the vehicle because the base brakes still function

Answer

Clear the fault code and retest

Answer

Ask the driver if the ABS has worked recently

Question 2

During an F80 inspection, which condition of the exhaust system is acceptable?

Accepted Answer

An intact exhaust system with secure mounting and no leaks before the exit point

Answer

An exhaust leak between the engine and catalytic converter

Answer

A muffler hanging loosely from a single bracket

Answer

Exhaust gases detectable inside the passenger compartment

Question 3

How should an F80 inspector document a conditional pass when a minor defect is noted but does not meet rejection criteria?

Accepted Answer

Note the defect on the inspection report and advise the owner to repair it promptly

Answer

Verbally inform the owner and issue a full pass with no record

Answer

Automatically reject the vehicle for any observed defect

Answer

Issue a rejection sticker and require immediate repair

Question 4

During an F80 undercarriage inspection, what is the inspector checking when examining the CV axle boots?

Accepted Answer

Whether the boots are cracked, torn, or leaking grease that could indicate joint failure

Answer

Whether the boots are the original factory color

Answer

The age of the CV boots based on the vehicle's title date

Answer

Whether the CV joints spin freely with no resistance

Question 5

Which condition of a vehicle's tires would pass an F80 inspection?

Accepted Answer

A tire meeting minimum tread depth with no structural damage, proper inflation, and correct size

Answer

A tire with a sidewall bulge or bubble

Answer

A tire with visible cord or belts showing through the tread

Answer

A tire with a large nail embedded in the sidewall

Question 6

What is the inspector's responsibility when a vehicle presented for an F80 inspection has a VIN plate that appears tampered with or missing?

Accepted Answer

Refuse to inspect the vehicle and report the discrepancy to the appropriate authority

Answer

Complete the inspection and note it at the end

Answer

Replace the VIN plate with a new one and continue

Answer

Ask the owner for an explanation and proceed if the story seems reasonable

Question 7

Under F80 inspection procedures, which of the following is required when inspecting a vehicle with a trailer hitch installed?

Accepted Answer

The hitch must be securely mounted with no cracks, and all wiring must be functional if present

Answer

The hitch must be removed before inspection

Answer

Only the trailer wiring plug is checked, not the hitch itself

Answer

Trailer hitches are excluded from F80 inspection scope