Fire Behavior and Combustion Principles Flashcards
7 cards from real F80 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Fire Behavior and Combustion Principles flashcards as text
What term describes the minimum temperature at which a liquid produces enough vapor to ignite momentarily when exposed to an open flame?
Answer: Flash point
The flash point is the lowest temperature at which a liquid produces sufficient vapor to flash momentarily when an ignition source is applied.
During a backdraft event, what is the primary gas that fuels the explosive ignition when fresh air is introduced?
Answer: Carbon monoxide
Carbon monoxide accumulates in an oxygen-deficient fire environment and ignites explosively when fresh air (oxygen) is suddenly introduced, causing a backdraft.
Which heat transfer method is primarily responsible for fire spreading across the underside of a ceiling in a room?
Answer: Convection
Convection carries hot gases and flames laterally across the ceiling, spreading fire to uninvolved areas of the room.
What is the name of the phenomenon where unburned pyrolysis gases ignite simultaneously throughout a room, causing a sudden full-room fire?
Answer: Flashover
Flashover occurs when radiant heat causes all combustible surfaces in a compartment to reach their ignition temperature nearly simultaneously.
Which component of the fire tetrahedron, if removed, is the basis for how dry chemical extinguishers work?
Answer: Chemical chain reaction
Dry chemical agents interrupt the chemical chain reaction of combustion, which is the fourth side of the fire tetrahedron beyond the classic triangle.
A firefighter notices flames rolling along the ceiling before flashover. This pre-flashover indicator is called:
Answer: Rollover
Rollover (also called flameover) describes flames extending across the ceiling as unburned gases ignite at the hot gas-air interface above the neutral plane.
What factor most directly determines the rate at which a solid fuel undergoes pyrolysis?
Answer: Applied heat flux to the fuel surface
The rate of pyrolysis is primarily driven by the heat flux applied to the fuel surface, which dictates how quickly the solid breaks down into combustible gases.