Impairment Control and Fire Watch Procedures Flashcards

When a sprinkler system in a building must be taken out of service for maintenance, the Fire Safety Director must FIRST:

Answer: Notify the FDNY and the building owner, and establish a fire watch

NYC rules require immediate notification to the FDNY whenever a fire suppression system is taken out of service, and a fire watch must be established to compensate for the loss of automatic protection. The building owner must also be informed.

During a required fire watch, a fire watch patrol member must:

Answer: Continuously tour the affected area at intervals not exceeding 30 minutes and maintain a written log

A fire watch requires active, continuous patrols of the unprotected area. NYC regulations specify patrol intervals (not exceeding 30 minutes) and require a written log recording the time and results of each patrol to document that the watch was properly maintained.

What is a Hot Work Permit, and when is it required?

Answer: Written authorization required before any work involving open flames, sparks, or heat that could ignite a fire, such as welding or cutting

A Hot Work Permit is required before any activity that generates open flames, sparks, or heat sufficient to ignite surrounding materials — including welding, cutting, brazing, and grinding. The permit process ensures fire hazards are identified and controlled before work begins.

Before a Hot Work Permit is issued, which precaution should be verified in the immediate work area?

Answer: Combustible and flammable materials have been removed or protected from ignition sources

Before issuing a Hot Work Permit, the area must be inspected to ensure combustible materials are removed, relocated, or shielded. Sparks from welding or cutting can travel significant distances and ignite materials that appear far from the work zone.

How long after hot work is completed must a fire watch typically be maintained in the work area?

Answer: At least 30 minutes, and up to several hours depending on the materials present

Smoldering fires from hot work can remain hidden in walls, insulation, or structural members for 30 minutes or longer before flaring up. A minimum 30-minute post-work fire watch is standard, with longer periods required when combustible materials or hard-to-inspect spaces are involved.

A contractor cuts an 18-inch section of a wet sprinkler pipe to install a new branch line. The repair will take approximately 4 hours. Which action is the building's Fire Safety Director required to take?

Answer: Notify the FDNY of the impairment, establish a fire watch for the affected area, and restore the system as soon as the work is complete

Cutting a wet pipe takes a portion of the sprinkler system out of service. The Fire Safety Director — not the contractor — bears responsibility for notifying the FDNY of the impairment and instituting compensatory fire watch measures for as long as the system is inactive.