← All F80 Flashcard Decks

F80 Fire Safety Procedures Flashcards

7 cards from real F80 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 F80 Fire Safety Procedures flashcards as text
  1. What is the minimum travel distance requirement that typically triggers the need for two separate exits in a building?

    Answer: When the occupant load exceeds 49 persons or travel distance exceeds code limits

    Two exits are generally required when the occupant load exceeds 49 persons or when the allowable travel distance to a single exit is exceeded per applicable codes.

  2. Which type of sprinkler head is designed to activate at the lowest temperature and is best suited for high-hazard areas?

    Answer: Ordinary temperature (135–170°F)

    Ordinary temperature-rated sprinkler heads (135–170°F) activate at the lowest temperatures and are used in standard environments where ambient temperatures don't exceed 100°F.

  3. When should a fire extinguisher be hydrostatically tested?

    Answer: Every 5 years for stored-pressure dry chemical extinguishers

    Stored-pressure dry chemical fire extinguishers must undergo hydrostatic testing every 5 years per NFPA 10.

  4. In a fire emergency, the term 'shelter-in-place' means occupants should:

    Answer: Remain in a safe area within the building and seal gaps to prevent smoke entry

    Shelter-in-place means staying inside a designated safe area, sealing doors and vents, and awaiting further instructions when evacuation is more dangerous than remaining inside.

  5. What does a flashing red light on a smoke detector typically indicate?

    Answer: The detector is functioning normally in standby mode

    Most residential and commercial smoke detectors flash a red LED at regular intervals (e.g., every 30–60 seconds) to indicate the unit is in normal standby/operational mode.

  6. Which fire detection system is best suited for protecting a computer server room where water damage must be avoided?

    Answer: Clean agent suppression system

    Clean agent suppression systems discharge a gaseous agent that suppresses fire without water, making them ideal for protecting sensitive electronics in server rooms.

  7. What action should employees take when they discover a fire that is beyond the incipient stage?

    Answer: Alert others, pull the nearest fire alarm pull station, and evacuate

    When a fire is beyond the incipient (early) stage, employees should immediately alert others, activate the alarm, and evacuate rather than attempt to fight the fire.