F80 F80 Inspection Procedures 3

Question 1

During an F-80 fire guard inspection of a building under construction, what is the required frequency for inspecting temporary heating devices?

Accepted Answer

Every 30 minutes

Answer

Every hour

Answer

Every 2 hours

Answer

Once per shift

Question 2

What should an F-80 fire guard do upon discovering an obstruction blocking a means of egress during a routine inspection?

Accepted Answer

Immediately remove or report the obstruction for removal

Answer

Note it in the log and continue the inspection

Answer

Wait until the end of shift to report it

Answer

Contact the building owner before taking action

Question 3

Which document must an F-80 fire guard maintain on-site to record all inspection findings and fire safety conditions?

Accepted Answer

A fire guard log book

Answer

A building permit

Answer

An occupancy certificate

Answer

A fire department access card

Question 4

When inspecting fire extinguishers during an F-80 fire guard tour, which condition would require the extinguisher to be immediately removed from service?

Accepted Answer

The pressure gauge needle is in the red zone

Answer

The inspection tag is missing a single monthly entry

Answer

The extinguisher is mounted 2 inches above the required height

Answer

The extinguisher label has minor fading

Question 5

What is the primary purpose of conducting a perimeter inspection as part of F-80 fire guard duties at a construction site?

Accepted Answer

To verify that combustible waste and debris are not accumulating near the building

Answer

To count the number of workers on site

Answer

To check that all construction permits are displayed

Answer

To measure wind speed for crane operations

Question 6

During an inspection, an F-80 fire guard notices that a required fire safety plan is not posted at the site. What is the correct course of action?

Accepted Answer

Notify the site safety manager and document the deficiency in the log

Answer

Post a handwritten replacement plan

Answer

Suspend all hot work until the plan is restored

Answer

Evacuate the building immediately