F04 Building Fire Safety 2

Question 1

What is the minimum width required for a means of egress corridor in a place of assembly under the NYC Fire Code?

Accepted Answer

44 inches

Answer

Egress corridors in places of assembly must be at least 44 inches wide to allow safe passage during an emergency.

Question 2

A Fireguard notices a fire door in a stairwell is propped open with a wooden wedge. What is the correct action?

Accepted Answer

Remove the wedge and allow the door to self-close

Answer

Fire doors must never be propped open; the Fireguard must immediately remove the obstruction and allow the door to self-close.

Question 3

Which type of extinguisher is recommended for a fire in electrical switchgear?

Accepted Answer

Class C CO2 extinguisher

Answer

Class C extinguishers use non-conductive agents like CO2 or dry chemical and are rated safe for energized electrical equipment.

Question 4

Under FDNY regulations, how often must a Fireguard conduct tours of the premises during a fire watch?

Accepted Answer

At least once per hour

Answer

FDNY regulations require the Fireguard to conduct patrol tours of the entire premises at least once every hour during a fire watch.

Question 5

What does the term 'rated assembly' mean in fire protection?

Accepted Answer

A combination of building components tested as a unit for fire resistance

Answer

A rated assembly is a combination of building components (walls, floors, doors) tested together and assigned a fire-resistance rating in hours.

(F04) F04 Fireguard License Practice Test