← All F04 Flashcard Decks

Temporary Place of Assembly Rules Flashcards

7 cards from real F04 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Temporary Place of Assembly Rules flashcards as text
  1. What class of fire extinguisher is generally required in a temporary place of assembly to address ordinary combustible fires?

    Answer: Class A

    Class A extinguishers are used for ordinary combustibles such as wood, paper, and fabric, which are the most common fire hazards in assembly venues.

  2. How frequently must portable fire extinguishers be visually inspected at a temporary place of assembly?

    Answer: At least monthly, and before each event

    Portable fire extinguishers must be visually inspected monthly and verified before each event to confirm they are charged, accessible, and undamaged.

  3. Which of the following decorations is PROHIBITED in a temporary place of assembly under NYC Fire Code?

    Answer: Non-flame-retardant draperies or fabric hangings

    Non-flame-retardant draperies and fabric decorations are prohibited because they spread fire rapidly; all textiles must be treated or certified flame-retardant.

  4. Where should portable fire extinguishers be positioned in a temporary place of assembly?

    Answer: Mounted in visible, accessible locations near exits and potential hazard areas

    Fire extinguishers must be mounted in visible and accessible locations near exits and hazard areas so staff can reach them quickly without delay.

  5. What must a Fireguard verify regarding cooking or heating equipment used at a temporary place of assembly?

    Answer: That it is approved, properly positioned away from combustibles, and has a functioning suppression system if required

    The Fireguard must verify that cooking/heating equipment is approved for use, kept clear of combustibles, and equipped with required suppression systems.

  6. Open flames such as candles are used as decorations at a temporary place of assembly. What is the Fireguard's responsibility?

    Answer: Verify a permit has been issued for open flames and that candles are in approved holders with adequate clearance from combustibles

    Open flames in a place of assembly require an FDNY permit, approved holders, and safe clearance from combustibles — the Fireguard must verify all three conditions.

  7. What is the Fireguard's duty if a sprinkler head in a temporary place of assembly is found to be obstructed by decorations?

    Answer: Immediately require removal of the obstruction to restore full sprinkler coverage

    Any obstruction of a sprinkler head must be removed immediately because obstructions prevent effective fire suppression and violate fire code.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. nyc-business.nyc.gov — Fees, score release, score validity · verified Oct 2026
  2. nyc.gov — Eligibility, test dates, test delivery, fees, exam format, registration deadline, retake policy, time limit · verified Oct 2026