Temporary Place of Assembly Rules Flashcards
7 cards from real F04 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Temporary Place of Assembly Rules flashcards as text
What action must a Fireguard take if the maximum occupant load of a temporary place of assembly is reached?
Answer: Stop all further entry and refuse additional guests until occupants leave
Once the maximum occupant load is reached, the Fireguard must stop further entry and prevent overcrowding to comply with the posted occupancy limit.
What is the minimum width required for main aisles in a temporary place of assembly seating arrangement?
Answer: 44 inches
Main aisles in a place of assembly must be at least 44 inches wide to allow safe and rapid egress during an emergency.
What type of lighting is mandatory for emergency egress paths in a temporary place of assembly?
Answer: Emergency lighting that activates automatically upon power failure
Emergency egress lighting that activates automatically upon power failure is required to illuminate exit paths and ensure safe evacuation.
Which of the following seating arrangements requires a fire safety inspection before use at a temporary place of assembly?
Answer: Temporary bleacher or riser seating
Temporary bleacher or riser seating presents structural and egress risks and must be inspected before it is approved for use in a temporary assembly.
What must a Fireguard do FIRST when a fire alarm activates during a crowded temporary place of assembly event?
Answer: Begin an orderly evacuation of all occupants immediately
Upon activation of a fire alarm, the Fireguard must initiate an orderly evacuation immediately without first investigating, as any delay can cost lives.
What is the maximum distance a person should have to travel to reach an exit in a temporary place of assembly?
Answer: 200 feet
Travel distance to an exit in a place of assembly generally must not exceed 200 feet to ensure occupants can evacuate quickly in an emergency.
At a temporary outdoor tent assembly, where must exits be located?
Answer: At opposite ends or sides of the tent to allow egress in multiple directions
Exits must be located at multiple, opposing sides or ends of a tent to ensure that occupants can escape regardless of where a fire or hazard originates.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- nyc-business.nyc.gov — Fees, score release, score validity · verified Oct 2026
- nyc.gov — Eligibility, test dates, test delivery, fees, exam format, registration deadline, retake policy, time limit · verified Oct 2026