← All Fireguard F-01 Fire Safety Flashcard Decks

Mixed Deck — All Fireguard F-01 Fire Safety Topics Flashcards

100 cards from real Fireguard F-01 Fire Safety practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 20 Mixed Deck — All Fireguard F-01 Fire Safety Topics flashcards as text
  1. What does it mean when a fire extinguisher's pressure gauge needle is in the red zone marked 'Recharge'?

    Answer: The extinguisher needs to be recharged

    A needle in the red recharge zone means the extinguisher has lost pressure and must be recharged before it will function properly.

  2. What is a deluge sprinkler system, and where is it commonly used?

    Answer: A system where all sprinkler heads are open and water flows to all heads simultaneously when activated

    Deluge systems have open (non-sealed) sprinkler heads and discharge water from all heads simultaneously upon activation, making them suitable for high-hazard areas like aircraft hangars.

  3. What is the fire guard's responsibility regarding means of egress at a construction site?

    Answer: Ensuring all exit paths are clear, accessible, illuminated, and not blocked by materials or equipment

    The fire guard must verify that all exit paths remain clear and accessible during each patrol, as construction activities frequently create temporary obstructions.

  4. What is the proper storage method for flammable liquids at a construction site?

    Answer: In approved flammable liquid storage cabinets or designated areas away from ignition sources

    Flammable liquids must be stored in approved containers within designated storage cabinets or areas, away from heat sources, electrical panels, and other potential ignition sources.

  5. How should a fire guard handle suspicious odors during patrol?

    Answer: Investigate the source, document the finding, and report to the supervisor; evacuate if gas is detected

    Unusual odors can indicate smoldering fires, gas leaks, or chemical hazards. Immediate investigation and appropriate reporting can prevent a small problem from becoming a disaster.

  6. A Class K fire extinguisher is specifically designed for use in which environment?

    Answer: Commercial cooking kitchens

    Class K extinguishers are designed for fires involving cooking oils and fats in commercial kitchen equipment such as deep fryers.

  7. What is a Class K fire?

    Answer: A cooking fire involving oils and fats in commercial kitchens

    Class K fires specifically involve cooking media like vegetable oils, animal fats, and greases in commercial cooking equipment, requiring wet chemical extinguishers.

  8. What is the difference between a fire door and a regular door?

    Answer: Fire doors are rated to resist fire for a specific time period and have self-closing mechanisms

    Fire doors are constructed and tested to withstand fire for rated periods (20-180 minutes) and include self-closing devices to ensure they remain closed during a fire.

  9. After a fire extinguisher has been partially used, what must be done before returning it to service?

    Answer: Recharge or replace it immediately

    Any extinguisher that has been used, even partially, must be recharged or replaced before being returned to its designated location.

  10. After a temporary heating device is shut off, how long must fire watch continue?

    Answer: At least 1 hour after shutdown

    Fire watch must continue for at least 1 hour after temporary heating devices are shut off, as residual heat and hot surfaces can still ignite nearby combustible materials.

  11. What is a muster point at a construction site?

    Answer: A predetermined safe location where all workers gather after evacuation for headcount

    The muster point is a safe area away from the building where evacuated workers gather so supervisors can take accountability and determine if anyone is missing.

  12. What is the purpose of fire stopping in construction?

    Answer: Sealing gaps and penetrations in fire-rated assemblies to prevent fire and smoke spread

    Fire stopping involves sealing penetrations (pipes, wires, ducts) through fire-rated walls and floors with fire-resistant materials to maintain the integrity of fire barriers.

  13. Under which condition is hot work generally PROHIBITED regardless of precautions taken?

    Answer: In areas where flammable vapors or explosive atmospheres are present

    Hot work is prohibited in or near areas containing flammable vapors, gases, or explosive atmospheres because a single spark can cause an explosion.

  14. Under NYC rules, a Certificate of Fitness (COF) holder performing fire watch must inspect the affected area at what minimum interval when a sprinkler system is impaired?

    Answer: Every 30 minutes

    When a sprinkler system is out of service, the designated fire watch patrol must inspect the impaired area at intervals not exceeding 30 minutes.

  15. What should a fireguard do if a fire extinguisher is found to have a broken or missing seal?

    Answer: Report it as defective and remove it from service

    A broken or missing tamper seal indicates the extinguisher may have been used or tampered with and must be taken out of service and reported.

  16. Which type of fire extinguisher should NOT be used on a Class C (electrical) fire?

    Answer: Water extinguisher

    Water extinguishers conduct electricity and must never be used on energized electrical equipment fires.

  17. What is the purpose of the inspector's test valve on a wet pipe sprinkler system?

    Answer: To simulate the flow of one sprinkler head to test alarms without opening a sprinkler head

    The inspector's test valve releases water at a rate equivalent to one sprinkler head activating, allowing testers to verify that flow alarms activate correctly without discharging the system.

  18. What is the FDNY requirement for fire guard training?

    Answer: Guards must pass the FDNY Certificate of Fitness exam demonstrating knowledge of fire safety and fire watch procedures

    Fire guards must demonstrate competency by passing the FDNY-administered Certificate of Fitness exam, which covers fire prevention, detection, emergency procedures, and fire watch duties.

  19. What should an F-01 guard do if trapped by fire and unable to evacuate?

    Answer: Close doors between yourself and the fire, signal for help from a window, and call 911 with your location

    If trapped, closing doors creates barriers against fire spread, signaling from windows helps rescuers locate you, and calling 911 with your exact location guides the fire department.

  20. What does 'compartmentalization' mean in fire safety?

    Answer: Dividing a building into fire-resistant sections to contain fire spread

    Compartmentalization uses fire-rated walls, floors, and doors to divide buildings into sections that resist fire spread, buying time for evacuation and firefighting.