F-01 - F-01 Fireguard Hot Work Operations and Permits Questions and Answers Flashcards
6 cards from real F-01 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 F-01 - F-01 Fireguard Hot Work Operations and Permits Questions and Answers flashcards as text
Which agency issues hot work permits for construction and demolition sites in New York City?
Answer: NYC Fire Department (FDNY)
The FDNY has jurisdiction over hot work permits at NYC construction and demolition sites under the NYC Fire Code.
During hot work, a fireguard observes a small fire start in adjacent debris. What is the first action?
Answer: Attempt to extinguish the fire with the on-site extinguisher and activate the fire alarm if it cannot be controlled
The fireguard should attempt to suppress a small fire immediately with the available extinguisher and simultaneously sound the alarm if the fire cannot be quickly controlled.
A hot work permit typically specifies which of the following?
Answer: The specific location, type of work, date, time period, and required precautions
A hot work permit details the exact work location, nature of the hot work, authorized dates and times, and the fire safety precautions that must be in place.
If combustibles cannot be removed from within 35 feet of a hot work area, what is the acceptable alternative?
Answer: Protect combustibles with fire-resistant blankets or shields
When combustibles cannot be relocated, they must be covered or shielded with fire-resistant blankets or barriers to prevent ignition from sparks and heat.
What entry must a fireguard make in the fire watch log immediately after hot work is completed?
Answer: The time work ended, the post-work watch start time, and a notation confirming no fire was detected
The log must record when hot work ended, when the mandatory post-work fire watch began, and confirmation that the area remained fire-free during the watch period.
Why is a fire watch required after hot work even when no visible sparks or flames are present?
Answer: Residual heat can ignite smoldering materials that may not produce visible flames for some time
Smoldering combustion can persist in walls, floors, or debris after hot work ends, potentially developing into an open fire long after the work area appears safe.