F-01 - F-01 Fireguard Fire Alarm Systems and Notification Procedures Questions and Answers Flashcards
6 cards from real F-01 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 F-01 - F-01 Fireguard Fire Alarm Systems and Notification Procedures Questions and Answers flashcards as text
What is the Fire Command Center (FCC) in a high-rise building used for?
Answer: Centralizing fire alarm annunciation, communications, and emergency control functions
The FCC serves as the central hub where alarm signals are displayed, FDNY can communicate with the building, and emergency systems such as elevators and HVAC can be controlled.
If the fire alarm system goes into trouble mode (supervisory signal), what should the fireguard do?
Answer: Log the trouble signal, notify the building engineer or supervisor, and monitor the system for changes
A trouble/supervisory signal indicates a fault in the system (such as a low battery or open circuit) that must be documented, reported, and investigated to ensure the system remains operational.
How should a fireguard respond if they discover the fire alarm panel is showing a zone in alarm?
Answer: Proceed to the alarming zone to investigate while ensuring 911 has been called
When a zone shows in alarm, the fireguard must physically check that location while ensuring emergency services are notified, as a real fire may be present.
During a fire drill, who is responsible for coordinating floor warden communications with the fire command center?
Answer: The fireguard or fire safety director
The fireguard or fire safety director manages communications between floor wardens and the fire command center to ensure orderly evacuation during drills and actual emergencies.
What information must a fireguard relay to FDNY when calling 911 about a fire alarm activation?
Answer: Building address, the floor or zone in alarm, and a description of any visible signs of fire or smoke
FDNY dispatchers need the exact location, the zone or floor triggering the alarm, and any observable fire conditions to send the appropriate response.
An automatic fire alarm system in a building is interconnected with which other life-safety system to prevent smoke from spreading through HVAC ducts?
Answer: The HVAC smoke control system, which shuts down or reconfigures airflow upon alarm activation
When a fire alarm activates, the HVAC smoke control system automatically shuts down fans or activates smoke dampers to stop smoke from being distributed through air ducts.